Shark EP033 Vacuum Cleaner Manual

The Shark EP033 is a versatile upright vacuum cleaner designed for deep cleaning on carpets and hard floors. It features a powerful suction system, multiple cleaning modes, HEPA filtration, a detachable canister for portable cleaning, various attachments for different surfaces, and a long power cord for extended reach. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, detachable canister, power brush roll, HEPA filter, dust cup, crevice tool, dusting brush, upholstery tool, and extension wand.

Feature	Description
Power Brush Roll	Deep cleans carpets and agitates debris
HEPA Filtration	Captures 99.9% of dust and allergens
Detachable Canister	Converts to portable hand vacuum
Multiple Attachments	For crevices, upholstery, and dusting
Suction Control	Adjustable for different floor types
Large Dust Cup	Easy-empty container
Long Power Cord	25-foot cord for extended reach
LED Headlights	Illuminates dark areas under furniture
On-Board Storage	Holds attachments on vacuum body
Lightweight Design	Easy to carry and maneuver

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks into place.
Install dust cup: Slide dust cup into slot until secure.
Attach hose: Connect hose to vacuum body and detachable canister.
Install HEPA filter: Place filter into compartment as indicated.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use suction control dial for carpets or hard floors.
Empty dust cup: Ensure dust cup is empty before first use.
Test attachments: Attach tools for specific cleaning tasks.
Begin cleaning: Press power button and push vacuum forward.

CAUTION! Do not vacuum large objects or liquids. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark EP033 Upright Vacuum.
Power: 120V AC, 60Hz, 10 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 liters.
Filtration: HEPA filter, washable.
Attachments: Crevice tool, dusting brush, upholstery tool, extension wand.
Weight: 15 lbs.
Warranty: 5-year limited warranty.
Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Power button: Turns vacuum on/off. Suction control dial: Adjusts suction power for carpets or hard floors. Brush roll switch: Turns brush roll on/off for delicate rugs. Release pedals: For detaching canister and hose.

Indicator Lights: LED lights indicate power status and filter replacement. Dust cup full indicator: Alerts when dust cup needs emptying.

Settings: Carpet mode (high suction), hard floor mode (medium suction), bare floor mode (brush roll off). Accessory mode: Use with attachments for above-floor cleaning.

Using Attachments

Detach canister for portable cleaning. Attach tools to hose or extension wand.

Crevice tool: For tight spaces, corners, and edges.
Dusting brush: For shelves, blinds, and delicate surfaces.
Upholstery tool: For sofas, chairs, and stairs.
Extension wand: For high ceilings and under furniture.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Supports multiple cleaning modes for different surfaces.

Carpet mode: High suction with brush roll agitation.
Hard floor mode: Medium suction with brush roll on.
Bare floor mode: Suction only, brush roll off to protect floors.
Above-floor mode: Use with attachments for furniture and stairs.
Spot cleaning: Use handheld mode for small spills and messes.

WARNING! Do not use carpet mode on delicate rugs or hard floors without adjusting settings.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full indicator lights.
Clean filter: Rinse HEPA filter monthly; allow to dry completely.
Clear brush roll: Remove hair and debris from brush roll weekly.
Check hose: Remove clogs if suction decreases.
Inspect attachments: Clean tools as needed.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Safety Information

Read all instructions before use. Keep away from children and pets.

WARNINGS: Do not vacuum flammable materials, liquids, or sharp objects. Do not use with damaged cord or plug. Do not block vents. Store in dry place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is covered by U.S. patents. ETL listed for safety.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/plug	Check outlet; ensure plug is secure; check circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and brush roll for blockages.
Brush roll not spinning	Debris/switch	Clear brush roll of hair and debris; ensure brush roll switch is on.
Overheating	Blocked filter/vent	Clean filter; ensure vents are not obstructed; allow to cool.
Unusual noise	Foreign object	Turn off and unplug; inspect for objects in brush roll or hose.

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com