Shark EP031KC Vacuum Cleaner Manual

The Shark EP031KC is a versatile upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal filtration, LED headlights, large dust cup, wand, hose, and multiple attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks securely.
2. Install wand: Insert wand into hose connector until it locks.
3. Attach floor nozzle: Connect nozzle to wand until it clicks.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure pre-motor and post-motor filters are installed.
2. Adjust floor selector: Set to appropriate surface (carpet or hard floor).
3. Test attachments: Connect each to ensure proper fit.
4. Empty dust cup: Ensure it's empty before first use.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark EP031KC.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Dust Cup Capacity: 1.2 quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Filtration: HEPA-grade filter captures 99.9% of dust and allergens.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Power switch on handle turns vacuum on/off. Floor selector adjusts suction for carpet or hard floors.

Handle Controls: Power switch, floor selector (CARPET/HARD FLOOR).

Dust cup release: Press button to remove dust cup. Wand release: Press button to detach wand. Hose access: Press hose release to use attachments. Brushroll control: On/off switch for brushroll (some models).

Using Attachments

For above-floor cleaning: detach wand and connect desired attachment.

1. Turn off and unplug vacuum.
2. Press wand release to detach wand from floor nozzle.
3. Connect attachment to end of wand or hose.
4. Plug in and turn on to use.

Tip: Use crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.

Cleaning Modes

Two main modes: Carpet mode and Hard Floor mode.

1. Carpet mode: Higher suction; brushroll active for deep cleaning.
2. Hard floor mode: Lower suction; brushroll may deactivate to prevent scattering debris.
3. Above-floor mode: Use wand and attachments for furniture, stairs, ceilings.
4. Handheld mode: Detach hose and use with attachments for quick cleanups.

WARNING! Do not vacuum large objects, liquids, or hot ashes. Avoid vacuuming cords or drapes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When dust reaches MAX line; press release button.
2. Clean filters: Rinse pre-motor and post-motor filters monthly; air dry 24 hours.
3. Check brushroll: Remove debris wrapped around brushroll regularly.
4. Inspect hose and attachments: Clear clogs if suction decreases.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheated.

Service: 1-800-798-7398; sharkclean.com