Shark DuoClean Slim Upright QU201Q Series Vacuum Cleaner Manual

The Shark DuoClean Slim Upright QU201Q Series is a lightweight, powerful vacuum cleaner featuring DuoClean technology with a soft roller for fine dust and a bristle brush for deep carpet cleaning, Anti-Allergen Complete Seal technology, LED headlights, a large-capacity dust cup, and versatile floor-to-floor cleaning capabilities. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean floor nozzle, motorized brush roll, dust cup with filter, handle with controls, wand, and cleaning attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

1. Attach handle: Insert handle into main body until it clicks into place.
2. Attach wand: Insert wand into handle until secure.
3. Attach floor nozzle: Connect nozzle to wand or handle as needed.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are securely connected.

1. Check brush roll: Ensure it spins freely and is clear of obstructions.
2. Empty dust cup: Ensure dust cup is empty before use.
3. Select surface setting: Use brush roll control for carpets (ON) or hard floors (OFF).
4. Power on: Press power button on handle to begin vacuuming.

CAUTION! Do not vacuum up large objects, liquids, or hot ashes.

Specifications

• Model: QU201Q Series.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 0.9 quarts.
• Filtration:Washable foam and felt filter AttachmentsCrevice tool, dusting brush, upholstery tool WeightApproximately 12.5 lbs Warranty5-year limited warranty

  Controls and Settings

  Power button: Turns vacuum on/off. Brush roll switch: Engages/disengages motorized brush roll for carpets or hard floors.

  Handle Controls: Power button, brush roll switch. Floor Nozzle: LED lights, brush roll, suction opening. Wand Release: Button to detach wand for above-floor cleaning.

  Settings: Carpet mode (brush roll ON), hard floor mode (brush roll OFF), above-floor cleaning with attachments.

  Using Attachments

  For above-floor cleaning: Detach wand and connect desired attachment.

  1. Turn off and unplug vacuum.
  2. Press wand release button to detach wand.
  3. Connect crevice tool, dusting brush, or upholstery tool to wand.
  4. Plug in and turn on to use.

  Tip: Use crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.

  Cleaning Modes

  Supports multiple cleaning modes for different surfaces.

  1. Carpet cleaning: Engage brush roll for deep cleaning.
  2. Hard floor cleaning: Disengage brush roll to prevent scattering debris.
  3. Above-floor cleaning: Use wand with attachments for furniture, stairs, etc.
  4. Edge cleaning: Use nozzle edge to clean along baseboards.

  WARNING! Always turn off vacuum before changing modes or attachments.

  Maintenance & Care

  Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button to remove and empty when full.
  2. Clean filters: Wash foam and felt filters monthly with cold water; air dry completely.
  3. Check brush roll: Remove hair and debris from brush roll regularly.
  4. Inspect hose and wand: Clear any clogs.

  CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

  Regulatory Information

  FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

  Troubleshooting

  Symptom	Possible Cause	Corrective Action
  Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet.
  Loss of suction	Full dust cup/clog	Empty dust cup; check hose and wand for clogs.
  Brush roll not spinning	Obstruction/setting	Clear debris from brush roll; ensure brush roll is ON for carpets.
  Vacuum overheating	Clog/filter	Check for clogs; clean filters; allow to cool for 60 minutes.
  Unusual noise	Debris in brush roll/motor	Clear brush roll; inspect for foreign objects.

  Reset: Unplug for 60 minutes if overheating occurs.

  Service: 1-800-798-7398; sharkclean.com

  Shark DuoClean Slim Upright QU201Q Series Vacuum Cleaner Manual © - All Rights Reserved 2025