Shark DuoClean Powerfins IZ300EUT Vacuum Cleaner Manual

The Shark DuoClean Powerfins IZ300EUT is an upright vacuum cleaner featuring DuoClean technology with a soft roller for large debris and a bristle brush for deep-down cleaning, PowerFins brushroll for powerful carpet agitation, Anti-Allergen Complete Seal Technology with HEPA filter, LED headlights, and a versatile lift-away pod. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean PowerFins brushroll, Lift-Away pod with handle, Anti-Allergen Complete Seal with HEPA filter, LED headlights, On-board attachment storage, and multiple cleaning modes.

Assembly & Setup

Unpack and inspect all components. Assemble following steps.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install wand: Insert wand into handle socket and secure.
3. Attach hose: Connect hose to pod inlet and secure with twist lock.
4. Mount attachments: Place crevice tool and dusting brush in storage clips.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, ensure all filters are installed correctly.

1. Check filters: Ensure HEPA filter and pre-motor filter are properly seated.
2. Empty dust cup: Press release button to remove and empty dust cup.
3. Select floor setting: Use brushroll switch for carpets (ON) or hard floors (OFF).
4. Power on: Press power switch; LED lights will illuminate.
5. Adjust suction: Use suction control dial for different surfaces.

CAUTION! Do not vacuum wet spills or large objects. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark DuoClean Powerfins IZ300EUT.
• Technology: DuoClean with PowerFins brushroll.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, pet multi-tool.
• Power Cord: 25-foot length.
• Dust Cup Capacity: 1.5 quarts.
• Weight: 15.2 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, Suction control dial, Brushroll on/off switch.

Body Features: Dust cup release button, Hose release latch, Lift-Away release button.

Settings: Brushroll ON for carpets; OFF for hard floors. Suction control: Adjust from MIN to MAX for different surfaces. Lift-Away mode: Press release button to detach pod for portable cleaning.

Using Attachments

Accessories for above-floor cleaning.

1. Detach wand: Press wand release button and pull out.
2. Connect tool: Insert desired attachment into wand end.
3. Use Lift-Away: Press release button to detach pod; carry to cleaning area.
4. Common tools: Crevice tool for tight spaces; dusting brush for surfaces; upholstery tool for furniture.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Three primary cleaning modes.

1. Upright mode: For floor cleaning with brushroll engaged.
2. Lift-Away mode: Detach pod for stairs, furniture, and above-floor cleaning.
3. Handheld mode: Remove wand and use with attachments for spot cleaning.

WARNING! Always turn off vacuum before changing modes. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full.
2. Clean filters: Rinse HEPA filter and pre-motor filter monthly; air dry 24 hours.
3. Clear brushroll: Cut away wrapped hair/debris with scissors.
4. Check hose/wand: Remove clogs using long object.
5. Inspect belt: Replace if worn or damaged.

CAUTION! Unplug vacuum before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes to reset thermal cutoff.

Service: 1-800-798-7398; sharkclean.com