Shark DuoClean Powered Lift-Away IC160EU Series Vacuum Cleaner Manual

The Shark DuoClean Powered Lift-Away IC160EU Series is a versatile corded vacuum cleaner featuring DuoClean technology (a soft roller for fine dust and a bristle brush for large debris), Powered Lift-Away mode for above-floor cleaning, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and various attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, Lift-Away pod with handle, Dust Cup, HEPA Filter, Crevice Tool, Upholstery Tool, Pet Multi-Tool, Duster Crevice Tool, and Storage Caddy.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Insert Handle: Align the handle with the top of the Lift-Away pod and push down until it clicks into place.
2. Attach Hose: Connect the hose end to the port on the front of the pod until secure.
3. Connect Wand: Insert the metal wand into the hose grip until it clicks.
4. Attach Floor Nozzle: Align the wand with the socket on the floor nozzle and push down until it locks.
5. Plug into Power Outlet: Ensure the power cord is fully unwound before use.

WARNING! Ensure all connections are secure before operation. Keep fingers away from brushrolls during assembly.

First-Time Use

Before first use, ensure the dust cup and filters are installed correctly.

1. Check Filters: Verify the HEPA filter and pre-motor filter are properly seated in their compartments.
2. Select Surface Setting: Use the POWER/SURFACE switch to select "Hard Floor" or "Carpet" based on your flooring.
3. Power On: Press the foot pedal or power button on the handle to start suction.
4. Test Attachments: Connect the crevice tool or upholstery tool to the wand to ensure proper fit.
5. Empty Dust Cup: After initial use, press the release button to empty the dust cup into a trash bin.

CAUTION! Do not use on wet surfaces. Ensure the area is clear of large objects that could clog the vacuum.

Specifications

• Model Series: IC160EU (DuoClean Powered Lift-Away).
• Technology: DuoClean brushroll system, Powered Lift-Away.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Cord Length: Standard length for EU models (check specific variant).
• Dust Cup Capacity: Large, bagless container.
• Attachments Included: Crevice Tool, Upholstery Tool, Pet Multi-Tool, Duster Crevice Tool.
• Power Source: Corded Electric (220-240V, 50Hz).
• Warranty: Refer to regional warranty card for details.

Controls and Settings

Main controls located on the handle and floor nozzle.

Handle: Power Button, Lift-Away Release Button, Wand Release Pedal.

Floor Nozzle: POWER/SURFACE switch (Hard Floor/Carpet), Brushroll On/Off switch (for delicate rugs).

Settings: Select surface type via switch; use brushroll off for delicate area rugs; activate Lift-Away mode for stairs and above-floor cleaning; adjust suction power via handle control (if applicable).

Using Attachments

Attachments connect to the end of the wand or directly to the hose in Lift-Away mode.

1. Detach Wand: Press the wand release pedal and pull the wand out.
2. Select Tool: Choose the appropriate attachment (e.g., Crevice Tool for tight spaces).
3. Connect: Push the tool onto the end of the wand or hose until it clicks.
4. Clean: Guide the tool over the surface. The LED lights on the floor nozzle do not operate in handheld mode.
5. Return to Dock: Store attachments on the storage caddy when not in use.

Tip: For best results, move the tool slowly over the area to allow maximum suction.

Cleaning Modes

Two primary modes: Floor Cleaning and Powered Lift-Away.

1. Floor Cleaning: Vacuum is fully assembled. Use on carpets and hard floors. The DuoClean brushrolls engage automatically.
2. Activate Lift-Away: Press the release button on the handle to detach the pod. Carry the pod to clean stairs, furniture, or ceilings.
3. Brushroll Control: Use the switch on the floor nozzle to turn brushroll off for delicate rugs.
4. Surface Setting: Always match the POWER/SURFACE switch to your floor type for optimal cleaning and brushroll protection.

WARNING! Do not use the Powered Lift-Away mode to vacuum water or other liquids. Keep the hose away from heated surfaces.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

1. Empty Dust Cup: Press the release button and empty contents after each use or when full.
2. Clean Filters: Rinse the HEPA filter and pre-motor filter with cold water every month. Allow to dry completely for 24 hours before reinstalling.
3. Clear Brushrolls: Regularly remove hair and debris wrapped around the DuoClean brushrolls. Use the cleaning tool provided.
4. Check for Blockages: If suction power decreases, check the hose, wand, and nozzle for clogs.
5. Store Properly: Wind the power cord around the cord hooks and store in a dry place.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not use damaged filters.

Regulatory Information

This appliance complies with relevant EU directives for safety and electromagnetic compatibility (EMC). The symbol of the crossed-out wheeled bin indicates separate collection is required for electrical and electronic equipment. For disposal, follow your local regulations. For support, visit www.sharkclean.eu or contact your local Shark customer service.

Troubleshooting

Reset: Unplug for 45 minutes to reset thermal overload protection.

Service: For repairs, contact authorized Shark service centers. Do not attempt to disassemble the unit yourself.