Shark duoclean NV200Q Vacuum Cleaner Manual

The Shark duoclean NV200Q is a versatile upright vacuum cleaner featuring DuoClean technology for cleaning both carpets and hard floors in one pass, Anti-Allergen Complete Seal technology, LED headlights, a swivel steering handle, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean brushroll, Anti-Allergen Complete Seal system, LED headlights, swivel steering handle, large dust cup, crevice tool, dusting brush, upholstery tool.

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

1. Attach handle: Insert handle into main body until it clicks into place.
2. Install wand: Insert wand into handle and secure with locking mechanism.
3. Attach hose: Connect hose to wand and main body.
4. Attach floor nozzle: Connect floor nozzle to wand until it clicks.
5. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow these steps.

1. Select cleaning mode: Use brushroll control for carpets or hard floors.
2. Adjust height: Set floor selector to appropriate height for carpet pile.
3. Turn on: Press POWER button; LED lights will illuminate.
4. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
5. Empty dust cup: Press release button to remove and empty dust cup.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark duoclean NV200Q.
• Technology: DuoClean, Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filtration: HEPA filter included.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Warranty: 5-year limited warranty.
• Weight: 15 lbs.

Controls and Settings

Main controls located on handle. Handle: POWER button, brushroll control, floor height selector.

Brushroll Control: Press to engage brushroll for carpets; release for hard floors. Floor Height Selector: Adjust for low, medium, or high pile carpets. POWER: Turns vacuum on/off; LED lights indicate power status.

Settings: Use floor selector for optimal cleaning on different surfaces. For delicate rugs, use hard floor setting.

Using Attachments

Attachments: Crevice tool, dusting brush, upholstery tool.

1. Turn off and unplug vacuum before changing attachments.
2. Remove wand: Press release button to detach wand from floor nozzle.
3. Attach tool: Insert desired tool into wand or hose end.
4. Select suction: Use handle controls for appropriate suction power.

Tip: Use dusting brush for blinds, shelves, and electronics. Use crevice tool for corners and edges.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

1. Carpet mode: Engage brushroll; adjust height selector.
2. Hard floor mode: Disengage brushroll; use soft roller.
3. Above-floor mode: Use attachments for furniture, stairs, ceilings.
4. Spot cleaning: Use hose and attachments for concentrated areas.
5. Edge cleaning: Use floor nozzle edges to clean along baseboards.

WARNING! Do not vacuum wet spills, large objects, or sharp debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Empty after each use or when full.
2. Clean filters: Rinse HEPA filter every 3 months; air dry completely.
3. Check brushroll: Remove hair and debris from brushroll monthly.
4. Inspect hose: Clear clogs if suction decreases.
5. Store properly: Wrap cord around cord hooks; store in dry place.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com