Shark DuoClean NV200 Series Vacuum Cleaner Manual

The Shark DuoClean NV200 Series is a versatile upright vacuum cleaner featuring DuoClean technology with a soft roller for fine dust and a bristle brush for deep cleaning, Anti-Allergen Complete Seal Technology with HEPA filter, LED headlights, Lift-Away functionality for portable cleaning, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Lift-Away pod, Dust cup with HEPA filter, LED headlights, Hose with wand, Crevice tool, Upholstery tool, Pet multi-tool.

Feature	Description
DuoClean Technology	Combines soft roller and bristle brush for all floor types
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Lift-Away Function	Detachable pod for portable above-floor cleaning
LED Headlights	Illuminates dark areas under furniture
Power/Fins Control	Adjusts brushroll speed for different surfaces
Large Capacity Dust Cup	Easy-empty, bagless design
Attachments Included	Crevice tool, upholstery tool, pet multi-tool
Wand Release Pedal	Quickly releases wand for extended reach
Floor Selector Switch	Adjusts for carpet or hard floor cleaning

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Connect hose: Attach hose to front of vacuum; ensure secure connection.
Install wand: Insert wand into hose connector.
Attach floor nozzle: Connect floor nozzle to wand until it clicks.
Install filter: Ensure HEPA filter is properly seated in dust cup lid.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow operational steps.

Select floor setting: Use floor selector switch for carpet or hard floor.
Adjust brushroll: Use Power/Fins control for desired cleaning intensity.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Use attachments: Detach Lift-Away pod for above-floor cleaning.
Empty dust cup: Press release button when full; empty into trash.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model Series: NV200 Series.
Technology: DuoClean with soft roller and bristle brush.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Capacity: 1.5-quart dust cup.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery tool, pet multi-tool.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power button, Floor selector switch (Carpet/Hard Floor), Power/Fins control (Low/High).

Body Features: Dust cup release button, Wand release pedal, Hose release button, Brushroll access latch.

Settings: Carpet mode (increases brushroll speed), Hard Floor mode (reduces brushroll speed), Power/Fins control adjusts suction and brushroll action for different debris types.

Using Attachments

For above-floor cleaning: Use Lift-Away mode or attach tools directly to hose.

Detach Lift-Away pod: Press release button on body.
Select attachment: Connect crevice tool, upholstery tool, or pet multi-tool to hose or wand.
Clean surfaces: Use appropriate attachment for furniture, stairs, ceilings, etc.
Return to upright: Reattach pod to main body until it clicks.

Tip: Use pet multi-tool for pet hair on furniture and stairs. Use crevice tool for tight spaces.

Cleaning Modes

Supports multiple cleaning configurations.

Upright mode: For floor cleaning with floor nozzle attached.
Lift-Away mode: Detach pod for portable cleaning of stairs, furniture, etc.
Handheld mode: Remove wand and use hose with attachments for spot cleaning.
Above-floor mode: Use hose and wand with attachments for extended reach.

WARNING! Do not use vacuum to pick up sharp objects, liquids, or hot ashes. Unplug before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Empty after each use or when full indicator appears.
Clean filters: Rinse HEPA filter and foam filter every 3 months (air dry completely).
Check brushroll: Remove hair and debris from brushroll monthly.
Inspect hose and attachments: Clear clogs if suction decreases.
Store properly: Wrap cord around cord hooks; store in dry area.

CAUTION! Unplug vacuum before maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs.
Brushroll not spinning	Debris wrap/overheat	Unplug and remove debris from brushroll; wait 45 minutes if overheated.
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; check household fuse.
Dust cup difficult to empty	Debris blockage	Remove large debris manually; clean dust cup opening.
Unusual noise	Foreign object in brushroll or hose	Unplug and inspect brushroll, hose, and nozzle for obstructions.

Reset: Unplug for 45 minutes if motor overheats; plug back in.

Service: 1-800-798-7398; sharkclean.com