Shark duoclean IF130UKTH Vacuum Cleaner Manual

The Shark duoclean IF130UKTH is a versatile upright vacuum cleaner featuring DuoClean technology for cleaning both carpets and hard floors, Anti-Allergen Complete Seal technology, LED headlights, a large-capacity dust cup, and a range of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Handle with controls, Dust cup with release mechanism, Power cord, and various attachments.

Assembly & Installation

Unpack and inspect all contents. Assemble before first use.

1. Attach the handle: Align handle with main body and push until it clicks into place.
2. Install attachments: Store attachments on docking station or clip onto vacuum body.
3. Check filters: Ensure foam and felt filters are properly installed in dust cup.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Setup

Prepare vacuum for initial use.

1. Unwind power cord: Fully extend cord from cord wrap.
2. Adjust height setting: Set carpet dial to appropriate height for your floor type.
3. Test suction: Turn on power and test on a small area.
4. Familiarize with controls: Locate power switch and brushroll control.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark duoclean IF130UKTH.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Filters: Washable foam and felt filters.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. Power Switch: Turns vacuum on/off. Brushroll Switch: Activates/deactivates brushroll for hard floors. Carpet Height Dial: Adjusts for different carpet pile heights. Suction Control: Adjusts suction power (if applicable).

LED Indicators: Power on/off, brushroll status, filter check alert.

Settings: Carpet mode (brushroll on), Hard floor mode (brushroll off), Suction power (High/Low).

Using Attachments

For above-floor cleaning: detach hose and connect desired tool.

1. Turn off and unplug vacuum before changing attachments.
2. Remove wand from docking clips.
3. Connect attachment to end of wand or hose.
4. Select appropriate suction setting.
5. Clean upholstery, ceilings, corners, and other surfaces.

Tip: Use crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.

Cleaning Modes & Operation

Supports multiple floor types and cleaning scenarios.

1. For carpets: Set brushroll on and adjust height dial.
2. For hard floors: Turn brushroll off to prevent scattering debris.
3. Use LED lights: Illuminate under furniture and in dark corners.
4. Empty dust cup: Press release button when full; empty into trash.
5. Clean filters: Remove and wash foam and felt filters monthly.
6. Store vacuum: Wrap cord, dock attachments, store upright.

WARNING! Do not vacuum wet spills, burning materials, or sharp objects. Unplug before maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use. Wash filters every 3 months (or when indicated). Check brushroll for tangled hair/debris monthly. Inspect hose for clogs if suction reduces. Wipe exterior with dry cloth.

CAUTION! Allow filters to dry completely before reinstalling. Do not use damaged vacuum.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com