Shark DUO clean ZERO-M Lift-Away ZU700C Vacuum Cleaner Manual

The Shark DUO clean ZERO-M Lift-Away ZU700C is a powerful corded vacuum cleaner featuring DuoClean PowerFins technology, Zero-M self-cleaning brushroll, and a versatile Lift-Away design. It includes a HEPA filter, Anti-Allergen Complete Seal, LED headlights, and multiple cleaning modes for carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with DuoClean PowerFins, Lift-Away pod, HEPA filter, wand, hose, and multiple cleaning attachments.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into floor nozzle until it clicks.
2. Connect hose: Attach hose to pod and wand connectors.
3. Install filters: Ensure HEPA and pre-motor filters are in place.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Select floor type: Use mode selector for carpets or hard floors.
2. Begin cleaning: Push vacuum forward on floor surface.
3. Use Lift-Away: Detach pod for stairs, upholstery, or above-floor cleaning.
4. Empty dust cup: Press release button when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

• Model: ZU700C.
• Technology: DuoClean PowerFins with Zero-M brushroll.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Cord Length: XX feet.
• Dust Cup Capacity: XX liters.
• Power Source: 120V AC, 60Hz.
• Weight: XX lbs.

Controls and Modes

Access controls on handle and pod. Floor Nozzle: Power switch, mode selector (Carpet/Hard Floor), brushroll on/off.

Handle: Power button, wand release, hose grip.

Modes: Carpet mode (agitator brushroll on), Hard Floor mode (brushroll off for delicate surfaces). Lift-Away: Detach pod for portable cleaning. LED lights: Automatically illuminate when vacuum is on.

Cleaning Attachments

Use attachments for specific cleaning tasks. Attach to wand or hose end.

1. Crevice tool: For tight spaces, corners, and edges.
2. Dusting brush: For delicate surfaces, shelves, and blinds.
3. Pet multi-tool: For pet hair on furniture and stairs.
4. Upholstery tool: For sofas, chairs, and curtains.

Tip: Ensure vacuum is off when changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Check brushroll: Regularly remove debris and hair.
2. Inspect hose and wand: Clear any blockages.
3. Wipe exterior: Use dry cloth to clean pod and nozzle.
4. Store properly: Wrap cord, store attachments in caddy.

WARNING! Unplug vacuum before performing any maintenance. Do not use water on electrical parts.

Emptying the Dust Cup

Empty dust cup when full or after each use.

1. Turn off and unplug vacuum.
2. Press dust cup release button.
3. Hold over trash can; open bottom lid to empty.
4. Close lid securely until it clicks.
5. Reattach dust cup to pod.

CAUTION! Empty dust cup outdoors or in well-ventilated area if containing fine dust.

Filter Care

Clean filters monthly; replace as needed.

1. Pre-motor filter: Remove, tap to dislodge dust, rinse with water if washable. Air dry completely.
2. HEPA filter: Remove and tap gently. Do not wash. Replace every 12 months or as needed.
3. Reinstall filters: Ensure they are completely dry and seated properly.

WARNING! Never operate vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com