Shark DUO CLEAN UV700 E2GB Vacuum Cleaner Manual

The Shark DUO CLEAN UV700 E2GB is a powerful corded upright vacuum cleaner featuring DuoClean technology with a soft roller for large debris and a bristle brush for deep-down cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, LED headlights, a large-capacity dust cup, a powered lift-away pod for above-floor cleaning, a pet power brush, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean floor head, Powered Lift-Away pod, Pet Power Brush, Crevice Tool, Dusting Brush, Upholstery Tool, and Charging Dock (if applicable).

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a clean, flat surface.

1. Attach the handle: Insert the handle into the main body until it clicks securely into place.
2. Connect the hose: Attach the hose to the port on the front of the vacuum, ensuring a tight fit.
3. Install the floor nozzle: Align the DuoClean floor head with the connector at the base and push until it clicks.
4. Attach accessories: Store the Pet Power Brush, crevice tool, and dusting brush in the onboard caddy.
5. Plug in the power cord: Insert the plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

1. Power on: Press the power button located on the handle.
2. Select cleaning mode: Use the mode selector switch (Hard Floor, Carpet, Max) based on your surface.
3. Begin vacuuming: Push the vacuum forward on the floor. The brushroll will engage automatically.
4. Use lift-away mode: Press the release button to detach the pod for cleaning stairs, furniture, or ceilings.
5. Attach tools: For detailed cleaning, detach the hose and connect the desired accessory.

CAUTION! Keep hair, loose clothing, and fingers away from brushrolls and openings.

Specifications

• Model: Shark DUO CLEAN UV700 E2GB.
• Type: Corded Upright Vacuum with Lift-Away.
• Technology: DuoClean, Anti-Allergen Complete Seal with HEPA filter.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Attachments Included: Pet Power Brush, Crevice Tool, Dusting Brush, Upholstery Tool.
• Cleaning Path: 10 inches.
• Weight: Approximately 15 lbs.
• Warranty: Limited 5-year warranty (see manual for details).

Controls and Settings

Main controls are located on the handle and body. Handle: POWER button, Carpet/Hard Floor/Max mode selector. Body: Lift-Away release button, Brushroll on/off switch (for delicate rugs), Wand release button.

LED Indicators: Power On (blue), Brushroll Jam (red flashing), Full Dust Cup (amber).

Settings: Carpet mode (activates brushroll for deep cleaning), Hard Floor mode (gentle suction, brushroll on), Max mode (maximum suction for tough messes), Brushroll Off (for delicate floors or area rugs).

Using Cleaning Modes & Attachments

Select the appropriate mode and tool for the cleaning task.

1. For carpets: Use Carpet or Max mode. The Pet Power Brush is ideal for embedded pet hair.
2. For hard floors: Use Hard Floor mode. The soft roller picks up large debris without scattering.
3. For above-floor cleaning: Detach the Lift-Away pod. Attach the hose and desired tool (crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture).
4. For stairs: Use the Lift-Away pod with the hose and an attachment. Carry the pod by its handle.
5. For curtains and ceilings: Extend the wand fully and attach the dusting brush.

Tip: Regularly check the brushroll for tangled hair or threads and clean as needed.

Emptying the Dust Cup

Empty the dust cup when the full indicator lights up or after each use for optimal performance.

1. Turn off and unplug the vacuum.
2. Press the dust cup release button located at the top of the cup.
3. Lift the dust cup away from the vacuum body.
4. Hold over a trash can and press the bottom release latch to open the door. Debris will fall out.
5. Close the door securely and reattach the dust cup until it clicks into place.

WARNING! Empty dust cup outdoors or in a well-ventilated area if you have allergies. Avoid touching the filter during emptying.

Maintenance & Filter Care

Regular maintenance ensures peak performance and longevity.

• Pre-Motor Foam Filter: Rinse with cold water every 3 months. Air dry for 24 hours completely before reinstalling.
• HEPA Filter: Located behind the dust cup. Tap gently to remove dust every month. Replace every 12-18 months under normal use.
• Brushroll Cleaning: Use scissors to cut away wrapped hair and fibers. Remove the brushroll per manual instructions for thorough cleaning every 6 months.
• Check for Clogs: If suction is reduced, check the hose, wand, and nozzle for blockages.

CAUTION! Never use the vacuum without all filters installed and completely dry. Do not use detergents on filters.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For customer service, support, and to register your product, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com