Shark DUO CLEAN UV700 BP Vacuum Cleaner Manual

The Shark DUO CLEAN UV700 BP is a powerful upright vacuum cleaner featuring DuoClean technology with a soft roller for large debris and a bristle brush for deep-down cleaning, Anti-Allergen Complete Seal technology, LED headlights, a swivel steering handle, a large-capacity dust cup, multiple cleaning modes (Hard Floor, Carpet), a detachable pod for above-floor cleaning, and a UV sanitizing light. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with DuoClean floor head, Handle with controls, Dust cup with filter, Detachable pod, UV sanitizing light, Charging dock (if cordless model), and various cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble according to instructions.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Install floor head: Align floor head with the vacuum body and push until it locks.
3. Charge the vacuum (if cordless): Place on charging dock until indicator shows full charge.
4. Attach hose and wand: For above-floor cleaning, connect hose to pod and attach desired tool.

WARNING! Ensure vacuum is unplugged or turned off during assembly. Keep fingers clear of moving parts.

First-Time Use

Fully charge (if cordless) before first use. Select appropriate cleaning mode.

1. Power on: Press the POWER button on the handle.
2. Select floor mode: Use the mode selector for Hard Floor or Carpet.
3. Begin vacuuming: Push vacuum forward on floor; the brushroll will engage automatically.
4. Use attachments: Detach pod and connect tools for upholstery, stairs, or crevices.
5. Activate UV light: Press the UV button (if equipped) while cleaning to sanitize surfaces.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark DUO CLEAN UV700 BP.
• Technology: DuoClean brushroll system, Anti-Allergen Complete Seal.
• Power Source: Corded (120V AC) or Cordless (Lithium-ion battery).
• Dust Cup Capacity: XX liters (varies by model).
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Filtration: HEPA filter (washable).
• UV Light: Sanitizing feature for surface bacteria reduction.
• Weight: Approximately XX lbs (varies by model).
• Warranty: XX-year limited warranty (check documentation).

Controls and Settings

Handle controls: POWER button, Mode selector (Hard Floor/Carpet), UV button. Main body: Dust cup release, Pod release button.

Indicator Lights: Battery status (if cordless), Filter replacement reminder, UV light activation.

Settings: Adjust suction power (if available), select brushroll speed for carpet vs. hard floors. Use detachable pod with hose and wand for above-floor cleaning. UV light must be manually activated and is for dry surfaces only.

Cleaning Modes & Attachments

Hard Floor Mode: Optimizes suction and brushroll speed for hard surfaces. Carpet Mode: Increases brushroll agitation for deep carpet cleaning.

1. Select mode based on floor type using selector on handle.
2. For above-floor cleaning: Detach pod, attach hose and desired tool (crevice, brush, etc.).
3. Use pet multi-tool for pet hair on furniture and stairs.
4. Activate UV light (if desired) while cleaning to reduce germs.

Tip: Empty dust cup when it reaches the MAX fill line for optimal performance.

Maintenance & Care

Regular maintenance ensures peak performance.

1. Empty dust cup: Press release button, remove cup, and empty debris into trash.
2. Clean filters: Remove and rinse HEPA filter under cold water every 1-3 months. Air dry completely before reinstalling.
3. Clear brushroll: Remove floor head and cut away any wrapped hair or fibers from brushroll.
4. Check for blockages: Inspect hose, wand, and floor head if suction decreases.
5. Wipe exterior: Use a dry cloth to clean vacuum body.

WARNING! Unplug or turn off vacuum before maintenance. Do not use water on electrical parts.

UV Sanitizing Feature

The UV light reduces bacteria on surfaces. Activate manually by pressing UV button while vacuuming. Light will turn off automatically when vacuum is powered off or UV button is pressed again.

CAUTION! UV light is for dry surfaces only. Do not look directly at UV light. Not a substitute for disinfectant chemicals.

Storage & Handling

Store in a cool, dry place. For cordless models, store on charging dock to maintain battery. Wrap cord neatly (if corded) to prevent damage.

CAUTION! Do not store with a wet filter. Keep vacuum upright to prevent damage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: For cordless models, remove battery for 30 seconds and reinsert.

Service: 1-800-798-7398; www.sharkclean.com