Shark Detect Pro RV2820AE Vacuum Cleaner Manual

The Shark Detect Pro RV2820AE is a powerful robotic vacuum cleaner featuring advanced laser-based object detection and mapping, self-emptying base station, multi-surface cleaning with brush rolls, Wi-Fi connectivity, voice control compatibility, and smart home integration. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Technical Specifications 5. Controls and Indicators 6. Smart Home Connectivity 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Empty Base Station, Charging Dock, Side Brushes, Filter Set, Boundary Strips, Remote Control.

Feature	Description
Laser Detect Technology	Detects and avoids obstacles like cords, shoes, and pet toys
Self-Empty Base	Holds up to 60 days of dirt; automatically empties robot bin
Matrix Clean Navigation	Creates detailed home map for systematic cleaning
Multi-Surface Brush Roll	Cleans carpets, hardwood, tile, and other floors
Wi-Fi & App Control	Control via SharkClean app (iOS/Android)
Voice Control	Works with Alexa and Google Assistant
Recharge & Resume	Automatically returns to dock and resumes cleaning
Boundary Strips	Create no-go zones for specific areas
High-Efficiency Filter	Captures 99.7% of dust and allergens
Quiet Mode	Reduced noise operation for quiet cleaning

Unpacking and Setup

Unpack all components and inspect for damage.

Place Base Station: Position on level surface against wall with 3 feet clearance on each side.
Install Side Brushes: Attach to bottom of robot until they click into place.
Charge Robot: Place robot on charging contacts at base station.
Install Filter: Insert filter into dust bin compartment.
Power On: Plug base station into 120V outlet; ensure power light is on.

WARNING! Keep charging station away from water sources. Ensure proper ventilation around base station.

First-Time Configuration

Power on robot; follow setup procedure.

Initial Charge: Allow robot to charge fully (approx. 4 hours) before first use.
Download App: Install SharkClean app from App Store or Google Play.
Connect to Wi-Fi: Follow in-app instructions to connect robot to your 2.4GHz network.
Create Home Map: Start cleaning cycle to allow robot to map your home.
Set Up Rooms: Use app to label rooms and create cleaning zones.
Schedule Cleaning: Set daily or weekly cleaning schedules in app.

CAUTION! Clear floor of small objects, cords, and fragile items before first mapping run.

Technical Specifications

Model: RV2820AE Shark Detect Pro
Power Source: Lithium-ion battery (90 min runtime)
Charging Time: 4 hours to full charge
Dust Bin Capacity: 0.5L (robot), 2.5L (base station)
Noise Level: 65 dB (Normal), 58 dB (Quiet Mode)
Wi-Fi: 2.4GHz 802.11 b/g/n
Compatibility: iOS 12+, Android 8+, Alexa, Google Assistant
Cleaning Modes: Auto, Room, Spot, Manual, Quiet
Dimensions: Robot: 13.8" diameter × 3.7" height
Weight: 7.5 lbs

Controls and Indicators

Robot Top Controls: CLEAN (start/pause), SPOT CLEAN, DOCK (return to base), Wi-Fi indicator.

Base Station Indicators: Power (solid blue), Empty Base (flashing amber), Error (red).

App Controls: Start/Stop, Mode selection, Scheduling, Map editing, History, Notifications. Remote Control: Directional arrows, Clean, Dock, Spot Clean, Mode selection.

Smart Home Connectivity

Connect to Amazon Alexa or Google Assistant for voice control.

Enable Shark Skill in Alexa app or Google Home app.
Link your SharkClean account.
Discover devices.
Use voice commands: "Alexa, tell Shark to start cleaning" or "Hey Google, ask Shark to return to dock."

Tip: Ensure robot is connected to Wi-Fi and online before voice setup.

Cleaning Modes and Scheduling

Multiple cleaning modes for different needs.

Auto Mode: Robot intelligently cleans entire mapped area.
Room Cleaning: Select specific rooms in app for targeted cleaning.
Spot Cleaning: Concentrates on 3x3 foot area.
Manual Control: Use app or remote to drive robot manually.
Quiet Mode: Reduced suction for quieter operation.
Scheduling: Set daily or weekly schedules in app.
Boundary Strips: Place physical strips to block off areas.
No-Go Zones: Set virtual boundaries in app.

WARNING! Do not use on wet surfaces. Pick up large debris before cleaning.

Maintenance and Care

Regular maintenance ensures optimal performance.

Maintenance Task	Frequency	Procedure
Empty Dust Bin	After each cleaning	Press bin release button; empty contents
Clean Filter	Every month	Tap filter to remove dust; rinse if needed (air dry 24 hrs)
Clean Brush Rolls	Weekly	Remove hair and debris from main brush and side brushes
Clean Sensors	Monthly	Wipe cliff sensors and laser window with dry cloth
Clean Charging Contacts	Monthly	Wipe robot and dock contacts with dry cloth
Replace Filter	Every 6-12 months	Order replacement filter HEPA-F1
Replace Side Brushes	Every 6-12 months	Order replacement side brush set

CAUTION! Unplug base station before performing maintenance. Do not use water on electronic components.

Safety Information

Important safety instructions for proper use.

Keep away from children and pets during operation.
Do not use on wet surfaces or to pick up liquids.
Do not place on unstable surfaces.
Unplug base station before cleaning or maintenance.
Do not modify or attempt to repair internal components.
Use only Shark-approved accessories and replacement parts.
Keep hair, loose clothing, fingers, and body parts away from openings.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. ICES-003 Compliance: This Class B digital apparatus complies with Canadian ICES-003. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com/support or call 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/not docked	Ensure robot is properly seated on charger; wait for full charge
Poor suction	Full dust bin/clog	Empty dust bin; check for clogs in brush roll and air path
Robot gets stuck	Obstacles/cluttered area	Clear area of cords, tassels, and small objects; use boundary strips
Wi-Fi connection issues	Network/router issues	Ensure 2.4GHz network; restart router; reconnect in app
Base station not emptying	Full bag/clog	Replace bag in base station; check for clogs in emptying port
Error beeps/lights	Various issues	Consult app for specific error code; refer to manual section
Not returning to dock	Blocked path/low battery	Clear path to dock; ensure dock is powered; check battery level

Reset: Press and hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; sharkclean.com/support