Shark DETECT PRO RV2800S Series Vacuum Cleaner Manual

The Shark DETECT PRO RV2800S Series is a high-performance robotic vacuum cleaner featuring advanced laser-based navigation, powerful suction, self-emptying base station, multi-surface cleaning capabilities, Wi-Fi connectivity, and smart home integration. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Contents 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robotic Vacuum, Self-Emptying Base Station, Charging Dock, Side Brushes, High-Efficiency Filter, Remote Control (if applicable).

Feature	Description
Laser Navigation	Precision mapping and room recognition for efficient cleaning paths
Self-Emptying Base	Automatically empties dustbin into sealed bag for up to 30 days
Multi-Surface Brushroll	Adjusts automatically for carpets and hard floors
Powerful Suction	High-torque motor for deep cleaning
Wi-Fi Connectivity	Control via SharkClean app and voice assistants (Alexa, Google)
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual no-go zones via app or physical magnetic strips
HEPA Filtration	Captures 99.9% of dust and allergens
Spot Cleaning	Intensive cleaning of concentrated areas
Quiet Mode	Reduced noise operation for nighttime cleaning

Unpacking & Contents

Carefully unpack and verify all components.

Robotic Vacuum (main unit)
Self-Emptying Base Station with power adapter
Charging Dock (if separate)
Side Brushes (2x)
High-Efficiency Filter (pre-installed)
Extra Dust Bag for base station
Boundary Strip (magnetic)
User Manual & Quick Start Guide

WARNING! Handle with care; ensure all protective films are removed before first use.

First-Time Setup

Prepare the vacuum and base station for initial use.

Place Base Station: Position on level surface against wall, clear of obstacles (4 ft/1.2 m on each side, 5 ft/1.5 m front).
Install Side Brushes: Snap onto bottom of robot until clicks are heard.
Charge Robot: Place robot on dock; ensure charging contacts align. Full charge takes ~4 hours.
Install Dust Bag: Open base station lid, insert bag, close securely.
Power On: Plug base station into 120V outlet; robot will beep and light up.

CAUTION! Keep away from stairs and wet areas during setup.

Specifications

Model Series: RV2800S (DETECT PRO)
Navigation: LaserSmart™ mapping with room select
Dustbin Capacity: 0.5 L (robot), 1.0 L (base station bag)
Battery: Lithium-ion, up to 90 minutes runtime
Suction Power: Adjustable (Eco, Normal, Max)
Connectivity: 2.4 GHz Wi-Fi, SharkClean app, Alexa/Google Assistant
Filter: Washable HEPA-style filter
Noise Level: 65-70 dB (Max mode)
Power Source: 120V AC, 60Hz
Weight: 7.5 lbs (3.4 kg)

Controls and Indicators

Robot Top: CLEAN (start/pause), SPOT, DOCK (return home), WiFi indicator. Base Station: Status light (blue=ready, red=full/error).

App Controls: Start/Pause, Schedule, Select Rooms, Suction Settings, No-Go Zones, History. Voice: "Alexa, ask Shark to start cleaning."

LED Indicators: Battery (green=charged, red=low), Error (flashing red=see troubleshooting). Buttons: Hold CLEAN for 3 seconds to reset Wi-Fi.

Connecting to Wi-Fi & App

Download SharkClean app (iOS/Android).

Enable robot: Press CLEAN and DOCK simultaneously for 3 seconds until WiFi light flashes.
Open app, follow prompts to connect to 2.4 GHz network (not 5 GHz).
Select robot model, enter Wi-Fi password.
Wait for confirmation; robot will beep when connected.

Tip: Ensure robot is near router during setup. Restart router if connection fails.

Cleaning Modes & Scheduling

Supports automatic, room-specific, and manual cleaning.

Auto Clean: Press CLEAN or use app; robot maps and cleans entire level.
Room Select: After mapping, choose specific rooms in app.
Spot Clean: Press SPOT; robot spirals in 3-ft diameter.
Schedule: In app, set daily/weekly times (e.g., 9 AM weekdays).
Suction Modes: Eco (quiet), Normal (balanced), Max (deep clean).
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then continues.
Boundary Control: Set no-go zones in app or lay magnetic strips.

WARNING! Clear floor of cords, small objects, and pet accidents before cleaning.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dustbin: Remove and empty after each cycle (or as needed).
Clean Filter: Rinse under water every month; air dry 24 hours before reinstalling.
Check Brushes: Remove hair/debris from brushroll and side brushes weekly.
Clean Sensors: Wipe laser window and cliff sensors with dry cloth.
Replace Parts: Side brushes every 6-12 months; filter every year; base station bag when full.

CAUTION! Unplug base station before maintenance. Do not use wet filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product contains lithium-ion battery; dispose of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure contacts clean; wait for full charge.
Poor navigation	Dirty sensors/obstacles	Clean laser window and sensors; clear floor of clutter.
Wi-Fi not connecting	Wrong network/router issue	Use 2.4 GHz network; restart robot and router; check password.
Weak suction	Full dustbin/clogged filter	Empty dustbin; clean filter; check for blockages in brushroll.
Base station error light	Full bag/misaligned robot	Replace dust bag; ensure robot is properly seated on dock.
Robot stuck frequently	Thresholds/cords in path	Use boundary strips; secure cords; consider virtual barriers.

Reset: Hold CLEAN and DOCK for 10 seconds to factory reset (erases maps).

Service: 1-800-798-7398; sharkclean.com/support