Shark CZ500ANZ Series Vacuum Cleaner Manual

The Shark CZ500ANZ Series is a versatile upright vacuum cleaner designed for powerful deep cleaning on carpets and hard floors. It features advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal filtration, LED headlights, large-capacity dust cup, wand release, power switch, and multiple attachments.

Assembly & Setup

Unpack and inspect contents. Assemble according to instructions.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install floor nozzle: Align nozzle with vacuum body and push until secure.
3. Attach hose and wand: Connect hose to vacuum and wand to hose.
4. Store attachments: Place crevice tool, dusting brush, and upholstery tool in holder.
5. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all parts are properly assembled.

1. Check filters: Ensure pre-motor and post-motor filters are installed.
2. Select cleaning mode: Use selector switch for carpets or hard floors.
3. Adjust height: Vacuum automatically adjusts; manually adjust if needed.
4. Empty dust cup: Ensure dust cup is empty before use.
5. Test attachments: Try each attachment to ensure proper function.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush rolls.

Specifications

• Model: Shark CZ500ANZ Series.
• Power: 120V AC, 60Hz.
• Suction Power: Adjustable via cleaning mode selector.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Weight: 15 lbs.
• Noise Level: Standard for upright vacuums.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, wand release button. Body: Cleaning mode selector, dust cup release, cord wrap.

Cleaning Modes: CARPET (for high-pile carpets), HARD FLOOR (for tiles, wood), and BARE FLOOR (for delicate surfaces).

Filtration: Washable pre-motor and post-motor filters. Empty dust cup when full indicator lights up. Brush Roll: Self-cleaning; remove debris if tangled.

Attachments & Accessories

Included: Crevice tool, dusting brush, upholstery tool, pet hair tool.

1. Crevice tool: For tight spaces, corners, and edges.
2. Dusting brush: For delicate surfaces, shelves, and blinds.
3. Upholstery tool: For sofas, chairs, and curtains.
4. Pet hair tool: Removes pet hair from furniture and carpets.

Tip: Store attachments in holder for easy access.

Cleaning Modes

Select appropriate mode for surface type.

1. Carpet mode: Use for medium to high-pile carpets; increases suction.
2. Hard floor mode: Use for tiles, laminate, and vinyl; reduces suction to prevent scattering debris.
3. Bare floor mode: Use for delicate hard floors; minimal suction.
4. Above-floor cleaning: Use attachments for furniture, stairs, and ceilings.

WARNING! Do not vacuum wet or damp debris. Unplug before changing modes or attachments.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty into trash.
2. Clean filters: Rinse pre-motor and post-motor filters monthly; air dry 24 hours.
3. Check brush roll: Remove hair and debris; ensure free rotation.
4. Inspect hose and attachments: Clear clogs if suction reduces.
5. Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com