Shark CYCLONE 814100191B Vacuum Cleaner Manual

The Shark CYCLONE 814100191B is a powerful upright vacuum cleaner featuring Cyclone Technology for strong suction, a HEPA filter system for allergen capture, multiple cleaning modes (carpet, hard floor, above-floor), motorized brushroll, LED headlights, large-capacity dust cup, and a variety of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motorized brushroll, Handle with controls, Dust cup with HEPA filter, Hose with wand, Attachments (crevice tool, dusting brush, upholstery tool).

Feature	Description
Cyclone Technology	Maintains strong suction by separating debris
HEPA Filtration System	Captures 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Reduces frequency of emptying
Cleaning Mode Selector	Switch between carpet and hard floor settings
Power Button	Turns vacuum cleaner on/off
Brushroll On/Off Switch	Disengages brushroll for hard floors or delicate rugs
Wand Release Button	Detaches wand for above-floor cleaning
Dust Cup Release	Ejects dust cup for easy emptying

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Align handle with main body until it clicks into place.
Install wand: Insert wand into hose connector until secure.
Attach hose: Connect hose to the port on the back of the vacuum.
Install filter: Ensure HEPA filter is properly seated in dust cup lid.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; ensure area is clear of large debris.

Select cleaning mode: Use selector switch for carpet or hard floor.
Adjust height (if applicable): Set to appropriate carpet height for optimal cleaning.
Turn on power: Press POWER button; LED lights will illuminate.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Empty dust cup: Press release button when full and dispose of debris.

CAUTION! Do not vacuum wet surfaces, large objects, or hot ashes.

Specifications

Model: CYCLONE 814100191B.
Technology: Cyclone with HEPA filtration.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 quarts.
Cleaning Modes: Carpet, Hard Floor, Above-Floor.
Brushroll: Motorized with on/off control.
Attachments Included: Crevice tool, dusting brush, upholstery tool.
Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on handle. Power Button: Turns vacuum on/off. Brushroll Switch: Engages/disengages motorized brushroll. Mode Selector: Choose between carpet and hard floor settings. Wand Release: Press to detach wand for above-floor cleaning.

Indicator Lights: LED lights indicate power status and brushroll engagement. Filter Check Light: Illuminates when filter needs cleaning or replacement.

Using Attachments

For above-floor cleaning: detach wand and connect desired attachment.

Turn off vacuum and unplug from outlet.
Press wand release button to detach wand from main body.
Connect attachment to end of wand (crevice tool, dusting brush, etc.).
Plug in vacuum and turn on to use attachment.

Tip: Use upholstery tool for furniture, crevice tool for tight spaces, dusting brush for shelves.

Cleaning Modes

Three primary cleaning modes:

Carpet Mode: Brushroll engaged for deep cleaning. Use on medium to high-pile carpets.
Hard Floor Mode: Brushroll disengaged to prevent scattering debris. Use on wood, tile, laminate.
Above-Floor Mode: Use with wand and attachments for stairs, furniture, ceilings.

WARNING! Always turn off vacuum before switching modes or changing attachments.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use or when full.
Clean HEPA filter monthly: Rinse with cold water, air dry completely for 24 hours.
Check brushroll for tangled hair or strings; cut and remove with scissors.
Inspect hose and wand for clogs; clear if necessary.
Wipe exterior with dry cloth; do not use liquids.

CAUTION! Always unplug vacuum before maintenance. Never use vacuum without filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; clean filter; check hose/wand for blockages.
Brushroll not spinning	Tangled debris, brushroll switch off	Turn off, unplug, and clear brushroll; ensure switch is on.
Vacuum won't turn on	Power cord not plugged in, tripped outlet	Check power connection; try different outlet; check circuit breaker.
Unusual noise	Foreign object in brushroll or hose	Turn off immediately; inspect and remove obstruction.
Filter light on	Dirty or improperly installed filter	Clean or replace filter; ensure it is fully seated.

Reset: Unplug vacuum for 10 minutes, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com