Shark Cordless Detect Pro IW1600 Series Vacuum Cleaner Manual

The Shark Cordless Detect Pro IW1600 Series is a high-performance cordless vacuum cleaner featuring DuoClean PowerFins technology, Anti-Hair Wrap brushroll, LED headlights, HEPA filtration, a removable battery, and smart sensor technology for detecting hidden debris. It offers multiple cleaning modes, a self-cleaning brushroll, and compatibility with various Shark accessories. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized floor nozzle with DuoClean PowerFins, Anti-Hair Wrap brushroll, LED headlights, Handheld vacuum unit, Removable battery, Charging dock, HEPA filter, Crevice tool, Dusting brush, Upholstery tool.

Assembly & Setup

Unpack and inspect all contents. Assemble components before first use.

1. Attach wand to floor nozzle: Insert wand into nozzle until it clicks securely.
2. Attach handheld unit to wand: Align and push until it clicks into place.
3. Install battery: Slide battery into the back of the handheld unit until locked.
4. Place on charging dock: Ensure charging contacts align; charge fully before first use.
5. Attach accessories: Store crevice tool, dusting brush, and upholstery tool on dock.

WARNING! Ensure all connections are secure. Do not force components together.

First-Time Use

Fully charge battery before initial operation.

1. Charge battery: Place vacuum on dock; charging indicator will illuminate.
2. Power on: Press and hold power button on handle for 2 seconds.
3. Select mode: Use mode button to cycle through Eco, Normal, and Boost.
4. Begin cleaning: Push vacuum forward on floor; LED headlights will activate.
5. Empty dust cup: Press release button to remove and empty dust cup after use.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model Series: IW1600 Series.
• Power Source: Removable lithium-ion battery (included).
• Battery Run Time: Up to 60 minutes (Eco mode), 30 minutes (Boost mode).
• Charging Time: Approximately 4 hours for full charge.
• Filtration: HEPA filter captures 99.9% of particles down to 0.3 microns.
• Dust Cup Capacity: 0.7 quarts (dry).
• Weight: 7.5 lbs (assembled).
• Noise Level: ≤ 75 dB.
• Warranty: 5-year limited warranty (registration required).

Controls and Modes

Main controls located on handle: Power button, Mode button, Wand release button.

Cleaning Modes: Eco (extended run time), Normal (balanced cleaning), Boost (maximum suction for tough messes).

Battery Indicator: LED display shows green (high), yellow (medium), red (low). Brushroll Control: Automatically engages on floors; can be turned off for delicate rugs. Headlights: Automatically turn on when vacuum is powered.

Attachments & Accessories

Included: Crevice tool, Dusting brush, Upholstery tool. Compatible with Shark accessory kits.

1. Attach accessories: Remove wand, connect tool directly to handheld unit.
2. Use crevice tool: For tight spaces, corners, and between cushions.
3. Use dusting brush: For delicate surfaces, shelves, and blinds.
4. Use upholstery tool: For sofas, chairs, and stairs.

Tip: Store accessories on charging dock for easy access.

Cleaning Operation

Designed for carpets, hard floors, and above-floor surfaces.

1. Floor cleaning: Push vacuum forward and back slowly for best results.
2. Transition between surfaces: Vacuum automatically adjusts brushroll speed.
3. Above-floor cleaning: Press wand release, remove handheld unit, attach tool.
4. Empty dust cup: Hold over trash, press bottom release latch to open.
5. Clean filters: Remove and tap HEPA filter monthly; rinse foam filter as needed.
6. Check brushroll: Regularly remove debris wrapped around brushroll ends.

WARNING! Do not vacuum up large objects, liquids, or hot ashes. Unplug charger before maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use.
2. Clean filters monthly: Tap HEPA filter; rinse foam filter (air dry completely).
3. Inspect brushroll weekly: Remove any wrapped debris.
4. Check for blockages: If suction decreases, inspect hose, wand, and nozzle.
5. Store properly: Place on charging dock in a dry area.
6. Battery care: For long storage, charge to 50% and store in cool, dry place.

CAUTION! Do not use damaged filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-800-798-7398; sharkclean.com