Shark Cordless Clean & Empty BU3000 Series Vacuum Cleaner Manual

The Shark Cordless Clean & Empty BU3000 Series is a bagless, self-emptying cordless vacuum cleaner featuring a Clean & Empty base that automatically empties the dust cup, powerful suction with DuoClean technology, Anti-Allergen Complete Seal, LED headlights, multiple cleaning modes, and a rechargeable lithium-ion battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Cleaning Modes and Attachments 7. Using the Clean & Empty Base 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Vacuum cleaner with motorized floor nozzle, Clean & Empty docking base, removable dust cup, charger, and accessory tools.

Feature	Description
Clean & Empty Base	Automatically empties dust cup into sealed disposable bag
DuoClean Technology	Combines bristle brush and soft roller for all floor types
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the system
LED Headlights	Illuminates debris under furniture and in dark areas
Cordless Design	Rechargeable lithium-ion battery for up to 60 minutes runtime
Multiple Cleaning Modes	Eco, Normal, and Max suction power settings
Self-Cleaning Brushroll	Reduces hair wrap on the brushroll
Accessory Storage	On-board storage for crevice tool and upholstery tool
Battery Indicator	LED display shows remaining battery life
Washable Filters	Includes pre-motor and post-motor filters

Unpacking and Setup

Unpack and inspect all contents. Place Clean & Empty base on a stable, level surface.

Assemble vacuum: Attach floor nozzle to wand, then wand to vacuum body until clicks.
Install battery: Insert battery into vacuum body until securely locked.
Position base: Place base against wall with at least 2 feet clearance on each side.
Connect power: Plug base power cord into wall outlet.
Load disposal bag: Open base door, insert disposable bag into compartment, close door.

WARNING! Keep base away from heat sources and ensure proper ventilation. Do not block air vents.

First-Time Use

Fully charge the vacuum before first use.

Charge vacuum: Dock vacuum onto Clean & Empty base or plug charger directly into vacuum.
Power on: Press power button; select cleaning mode (Eco, Normal, Max).
Begin cleaning: Push vacuum forward on floors; use attachments for above-floor cleaning.
Auto-empty: After cleaning, dock vacuum; base will automatically empty dust cup.

CAUTION! Do not use vacuum to pick up liquids, large objects, or hot ashes.

Specifications

Model Series: BU3000 Series
Type: Cordless stick vacuum with self-emptying base
Dust Cup Capacity: 0.5 quarts (0.47 liters)
Base Bag Capacity: 30 days of debris (approx. 1 gallon)
Battery: Lithium-ion, rechargeable
Run Time: Up to 60 minutes (Eco mode)
Charge Time: Approximately 4 hours
Suction Power: Adjustable via Eco, Normal, Max modes
Filtration: Anti-Allergen Complete Seal with HEPA filter
Weight: 7.5 lbs (3.4 kg)
Power Source: 120V AC, 60Hz

Controls and Indicators

Vacuum Controls: Power button, Mode button (cycles through Eco/Normal/Max), Release buttons for wand and nozzle.

Clean & Empty Base: Power indicator, Empty button (manual trigger), Bag full indicator.

LED Display: Battery level indicator (5 bars), cleaning mode indicator, filter maintenance reminder.

Accessories: Crevice tool, upholstery tool, motorized pet tool (varies by model).

Cleaning Modes and Attachments

Select mode based on cleaning need: Eco for long runtime, Normal for everyday cleaning, Max for deep cleaning.

Floor cleaning: Use motorized floor nozzle; vacuum automatically adjusts between carpets and hard floors.
Above-floor cleaning: Detach wand; attach crevice tool, upholstery tool, or dusting brush.
Furniture and stairs: Use handheld mode with appropriate attachment.
Under furniture: LED headlights activate automatically in low light.

Tip: Empty dust cup before it reaches MAX line for optimal performance.

Using the Clean & Empty Base

Base automatically empties dust cup when vacuum is docked.

Dock vacuum: Align vacuum with base guides; push until seated and charging begins.
Auto-empty cycle: Base detects full dust cup and initiates 10-second emptying cycle.
Manual empty: Press EMPTY button on base to trigger emptying cycle.
Replace bag: When bag full indicator lights, open base door, remove and replace bag.

WARNING! Do not interrupt emptying cycle. Keep hands away from base opening during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean filters: Rinse pre-motor and post-motor filters monthly; air dry completely before reinstalling.
Clear brushroll: Remove debris from brushroll regularly; cut wrapped hair with scissors if needed.
Check for blockages: Inspect wand, hose, and nozzle for obstructions.
Clean sensors: Wipe dust cup and base sensors with dry cloth.
Store properly: Keep vacuum and base in dry, indoor location.

CAUTION! Unplug base before maintenance. Do not use vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Dispose of batteries according to local regulations. The RBRC seal indicates rechargeable battery recycling program.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged	Dock vacuum to charge; ensure base is powered.
Reduced suction	Full dust cup or clog	Empty dust cup; check for blockages in nozzle, wand, or hose.
Base not emptying	Bag full or misaligned	Replace disposal bag; ensure vacuum is properly docked.
Brushroll not spinning	Hair/debris wrap	Clear brushroll of obstructions; ensure floor nozzle is attached securely.
Battery drains quickly	Max mode usage	Use Eco or Normal mode for longer runtime; allow battery to cool if hot.
Unusual noise	Foreign object in vacuum	Turn off immediately; check for and remove obstruction.

Reset: Remove battery for 30 seconds, then reinstall.

Service: 1-800-798-7398; sharkclean.com