Shark Clean FlexStyle HD424EU Vacuum Cleaner Manual

The Shark Clean FlexStyle HD424EU is a versatile upright and canister vacuum cleaner featuring FlexStyle technology for easy maneuverability, a HEPA filtration system, multiple cleaning modes for carpets and hard floors, a motorized brushroll, a large-capacity dust cup, a telescopic wand, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, FlexStyle handle, Motorized brushroll, HEPA filter, Dust cup, Telescopic wand, Crevice tool, Upholstery brush, Dusting brush.

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

1. Attach the handle: Align the handle with the main body until it clicks into place.
2. Install the telescopic wand: Insert into the wand holder on the back of the vacuum.
3. Attach cleaning tools: Store tools on the docking clips or connect directly to the wand.
4. Install the HEPA filter: Remove the dust cup, insert the filter into its compartment.
5. Plug into a standard electrical outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, perform a quick check of all components.

1. Ensure the dust cup is empty and filter is properly seated.
2. Select the appropriate cleaning mode for your floor type using the mode selector.
3. Turn on the vacuum using the power switch.
4. Test the FlexStyle feature by gently bending the handle to clean under low furniture.
5. Practice attaching and detaching tools for above-floor cleaning.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: HD424EU
• Power: 700W motor
• Filtration: HEPA filter (washable)
• Dust Cup Capacity: 1.2 liters
• Cord Length: 7.5 meters
• Weight: 5.2 kg
• Noise Level: ≤ 78 dB(A)
• Cleaning Modes: Carpet, Hard Floor, Turbo
• Warranty: 5 years (motor), 2 years (general)
• Power Source: 220-240V AC, 50Hz

Controls and Settings

Main controls located on the handle and body. Power Switch: On/Off button. Mode Selector: Rotating dial for Carpet, Hard Floor, and Turbo modes. Brushroll On/Off: Button to engage/disengage motorized brushroll (for delicate rugs). FlexStyle Lock: Release lever to enable/disable handle flexibility.

Indicator Lights: Filter alert (red) when filter needs cleaning; Full dust cup alert (orange).

To adjust suction power: Use mode selector (Turbo for maximum suction). To empty dust cup: Press release button, remove cup, and empty into trash. To clean filter: Remove, rinse with water, and air dry completely before reinstalling.

Using Attachments

Attachments connect to the wand or directly to the hose.

1. Turn off and unplug the vacuum.
2. Detach the wand from the main body.
3. Choose attachment: Crevice tool for corners; Upholstery brush for furniture; Dusting brush for shelves.
4. Connect attachment to the end of the wand until it clicks.
5. Turn on vacuum and begin cleaning.

Tip: For high-reach cleaning, extend the telescopic wand fully and use the dusting brush.

Cleaning Modes & Techniques

Optimize cleaning based on surface type.

1. Carpet Mode: Engages brushroll for deep cleaning; use slow, overlapping strokes.
2. Hard Floor Mode: Raises brushroll to prevent scattering debris; use faster strokes.
3. Turbo Mode: Maximum suction for high-pile carpets or embedded dirt.
4. Above-Floor Cleaning: Use wand and attachments for curtains, ceilings, and furniture.
5. Under Furniture: Activate FlexStyle to bend handle and reach under low spaces.

WARNING! Do not vacuum sharp objects, liquids, or hot ashes. Avoid vacuuming loose cords.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty Dust Cup: After each use or when full indicator lights.
2. Clean Filter: Rinse HEPA filter every 3 months (or as needed) and air dry for 24 hours.
3. Check Brushroll: Monthly, remove hair and debris wrapped around brushroll.
4. Inspect Hose & Wand: Ensure no blockages; clear with a long, flexible object if needed.
5. Store Properly: Wrap cord around cord hooks; store in a dry place.

CAUTION! Always unplug before maintenance. Do not use damaged parts.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle according to local regulations. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.eu or contact customer service at +44 (0) 800 023 2024.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: +44 (0) 800 023 2024; www.sharkclean.eu