Shark Clean & Empty PowerDetect Vacuum Cleaner Manual

The Shark Clean & Empty PowerDetect is a cordless stick vacuum cleaner featuring PowerDetect technology for deep carpet cleaning, a self-cleaning brushroll, and an Auto-Empty base that automatically empties the dust cup into a sealed bag. It includes multiple cleaning modes, a HEPA filtration system, LED headlights, and smart sensor technology. Powered by a removable lithium-ion battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using the Auto-Empty Base 7. Cleaning and Maintenance 8. Battery and Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Vacuum main body, Auto-Empty Base, Charging Dock, Removable Battery, PowerDetect Motorized Floor Nozzle, Crevice Tool, Dusting Brush, Upholstery Tool.

Feature	Description
PowerDetect Technology	Automatically increases suction power on carpets
Self-Cleaning Brushroll	Reduces hair wrap automatically
Auto-Empty Base	Empties dust cup into sealed bag hands-free
HEPA Filtration	Captures 99.9% of dust and allergens
LED Headlights	Illuminates hidden debris under furniture
Multiple Cleaning Modes	Eco, Normal, and Boost settings
Removable Battery	Lithium-ion, up to 60 minutes runtime
Smart Sensor Indicators	Displays battery life and blockage alerts
Wand Release Button	Converts to handheld vacuum easily
Charging Dock	For wall-mounted or floor charging

Unpacking and Setup

Unpack all components carefully. Place Auto-Empty Base on a flat, stable surface near a power outlet.

Assemble vacuum: Attach wand to floor nozzle until it clicks.
Install battery: Insert battery into back of vacuum until it locks.
Set up Auto-Empty Base: Plug power cord into outlet and place vacuum on dock.
Attach tools: Store crevice tool, dusting brush, and upholstery tool on dock or wall mount.

WARNING! Keep charger and vacuum away from water. Ensure all parts are securely connected before use.

First-Time Use

Fully charge battery before first use.

Charge battery: Place vacuum on charging dock; LED will pulse until fully charged.
Power on: Press power button; select cleaning mode (Eco for hard floors, Boost for carpets).
Begin cleaning: Push vacuum forward; PowerDetect will activate automatically on carpets.
Empty dust cup: Return vacuum to Auto-Empty Base; it will automatically empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes to prevent damage.

Specifications

Model: Shark Clean & Empty PowerDetect.
Technology: PowerDetect with smart suction adjustment.
Filtration: HEPA filter, washable.
Battery: Removable lithium-ion, 60 min max runtime.
Charging Time: Approx. 4 hours for full charge.
Dust Capacity: 30-day capacity with Auto-Empty Base bag.
Noise Level: ≤75 dB in Normal mode.
Weight: 7.5 lbs (without accessories).
Power Source: 120V AC, 60Hz for charging.

Controls and Modes

Main controls located on handle: Power button, Mode button (cycles through Eco/Normal/Boost), Battery indicator LED.

Cleaning Modes: Eco (extended runtime, low suction), Normal (balanced cleaning), Boost (max suction for deep cleaning).

Auto-Empty Base: LED indicators show charging status, bag fullness, and errors. Wand Release: Press button to detach wand for above-floor cleaning. Brushroll Control: On/Off switch for hard floors vs carpets.

Using the Auto-Empty Base

Base automatically empties dust cup when vacuum is docked.

Dock vacuum: Align vacuum with charging contacts on base.
Automatic emptying: Base senses full dust cup and activates suction to empty into bag.
Bag replacement: When bag full indicator lights, replace sealed bag (dispose properly).
Reset: After bag change, press reset button on base to clear indicator.

Tip: Ensure base is on a level surface and vacuum is properly seated for emptying.

Cleaning and Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: If not using base, press release to empty debris.
Clean filters: Rinse HEPA filter and pre-motor filter monthly (air dry completely).
Clear brushroll: Remove hair and debris from brushroll weekly.
Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
Wipe surfaces: Use dry cloth to clean vacuum and base exterior.

WARNING! Unplug charger and remove battery before maintenance. Do not use wet filters.

Battery and Charging

Use only Shark-approved battery and charger.

Charging: Place on dock; LED pulses red while charging, solid blue when full. Battery Life: Up to 60 min in Eco, 30 min in Normal, 15 min in Boost. Storage: Store in cool, dry place; charge every 6 months if not in use.

CAUTION! Do not expose battery to extreme temperatures or puncture. Replace if damaged.

Care & Storage

Store vacuum in a dry place, away from direct sunlight. Keep tools organized on dock.

CAUTION! Do not store with battery fully depleted; charge to at least 50% for long storage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery not charged/inserted	Charge battery; ensure it's fully seated and locked.
Reduced suction	Full dust cup/blockage	Empty dust cup; check hose, wand, and nozzle for obstructions.
Auto-Empty not working	Base not powered/bag full	Ensure base is plugged in; replace full bag; clear any blockages in base.
Brushroll not spinning	Hair/debris wrapped	Turn off and unplug; clean brushroll and remove any tangled debris.
Battery drains quickly	Old battery/Boost mode overuse	Use Eco mode for routine cleaning; replace battery if older than 2 years.

Reset: Remove battery for 10 seconds, then reinsert to reset electronics.

Service: 1-800-798-7398; sharkclean.com