Shark CH950EUT Vacuum Cleaner Manual

The Shark CH950EUT is a versatile upright vacuum cleaner featuring a powerful motor, advanced anti-allergen complete seal technology, LED headlights, swivel steering for easy maneuverability, multiple cleaning modes (carpet, hard floor, above-floor), a large-capacity dust cup, washable filters, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Cleaning Modes & Attachments 7. Emptying & Cleaning the Dust Cup 8. Filter Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Floor nozzle with brushroll and LED lights, Dust cup with release mechanism, Washable foam and felt filters, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Swivel Steering	Provides easy maneuverability around obstacles
Cleaning Modes	Carpet, Hard Floor, and Above-Floors settings
Large Capacity Dust Cup	Easy-to-empty, bagless design
Washable Filters	Foam and felt filters can be rinsed and reused
Brushroll On/Off	Switch to turn brushroll on for carpets or off for hard floors
Attachments	Crevice tool, upholstery tool, and dusting brush included
Power Cord	Long cord with storage hooks
Handle Controls	Power switch and brushroll control located on handle

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Align the handle with the main body until it clicks into place.
Connect the hose: Insert the hose end into the port on the front of the vacuum until secure.
Attach floor nozzle: Slide the nozzle onto the bottom of the vacuum until it locks.
Install attachments: Store crevice tool, upholstery tool, and dusting brush on the provided caddy or hooks.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the vacuum into a standard 120V AC outlet. Turn on using the power switch on the handle.

Select cleaning mode: Use the brushroll switch (on for carpets, off for hard floors).
Adjust height (if applicable): Some models have a manual height adjustment lever.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: For above-floor cleaning, detach the hose and connect desired tool.

CAUTION! Do not vacuum large, hard objects or liquids. Keep hair, strings, and cords away from the brushroll.

Specifications

Model: Shark CH950EUT.
Type: Upright vacuum cleaner with bagless dust cup.
Motor: Powerful suction motor with advanced filtration.
Technology: Anti-Allergen Complete Seal Technology.
Features: LED headlights, swivel steering, brushroll on/off.
Dust Cup Capacity: XX liters (check manual for exact volume).
Filters: Washable foam and felt filters.
Cord Length: XX feet.
Power Source: 120V AC, 60Hz.
Attachments: Crevice tool, upholstery tool, dusting brush.

Controls and Settings

Main controls located on the handle for easy access.

Power Switch: Turns the vacuum cleaner on and off.

Brushroll Switch: Turns the motorized brushroll on (for carpets) or off (for hard floors and delicate rugs).

Height Adjustment (if equipped): Manual lever to raise or lower the floor nozzle for different pile heights.

Dust Cup Release: Button or latch to detach the dust cup for emptying.

Hose Release: Button to detach the hose and wand for above-floor cleaning.

Using Cleaning Modes & Attachments

For carpets: Ensure brushroll is ON. For hard floors (wood, tile, laminate): Turn brushroll OFF.

Above-floor cleaning: Detach hose from vacuum body. Connect desired attachment.
Crevice tool: For tight spaces, corners, and along baseboards.
Upholstery tool: For sofas, chairs, stairs, and car interiors.
Dusting brush: For delicate surfaces, lampshades, blinds, and keyboards.

Tip: Use slow, deliberate strokes when using attachments for maximum suction.

Emptying & Cleaning the Dust Cup

Empty the dust cup when it reaches the "MAX" fill line.

Turn off and unplug the vacuum.
Press the dust cup release button and lift the cup away from the vacuum body.
Hold over a trash can. Press the bottom release latch to open the door, allowing debris to fall out.
Close the door securely until it clicks. Reattach the dust cup to the vacuum until it locks.

WARNING! Empty dust cup outdoors or in a well-ventilated area if containing fine dust or allergens. Do not use if the dust cup is damaged.

Filter Maintenance

Washable filters should be cleaned every 3 months under normal use, or more often if vacuuming fine dust.

Unplug vacuum. Remove dust cup.
Locate foam and felt filters inside the filter compartment.
Rinse filters under lukewarm water until water runs clear. Do not use soap.
Air dry filters completely for at least 24 hours before reinstalling.
Reinstall filters and dust cup securely.

CAUTION! Never operate the vacuum without filters installed. Never use wet filters.

Care & Storage

Unplug and cool down before storage. Wrap cord around storage hooks. Store in a dry, indoor location.

Clean brushroll regularly: Use scissors to cut away wrapped hair, strings, or fibers. Check for blockages in hose and nozzles.

CAUTION! Do not store vacuum while wet or damp. Keep away from heat sources and direct sunlight.

Regulatory Information

This appliance complies with relevant safety standards. Copyright © SharkNinja Operating LLC. Shark is a registered trademark. For support, visit www.sharkclean.com or contact customer service at 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose, blockage	Empty dust cup. Check and clean filters. Inspect hose, nozzle, and brushroll for obstructions.
Brushroll not spinning	Brushroll switch off, tangled debris, drive belt issue	Turn brushroll switch ON. Cut away hair and strings from brushroll ends. Consult manual for belt check.
Vacuum won't turn on	Not plugged in, tripped household circuit, faulty switch	Ensure plug is secure. Check household circuit breaker. Contact customer service if switch is faulty.
Unusual noise or smell	Blockage, foreign object in motor/fan, overheating	Immediately turn off and unplug. Check for and remove blockage. Allow to cool if overheated.
Dust cup not attaching	Misaligned, full, latch damaged	Empty dust cup. Align correctly and press until it clicks. Check for damage.

Service: For issues not resolved above, contact Shark Customer Service at 1-800-798-7398 or visit www.sharkclean.com.