Shark CarpetXpert HairPro Pet Vacuum Cleaner Manual

The Shark CarpetXpert HairPro Pet is a powerful upright vacuum cleaner designed specifically for homes with pets. It features advanced hair-pro technology to prevent tangles, a HEPA filtration system, multiple cleaning modes, motorized brushroll, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Motorized brushroll with Anti-Hair Wrap technology, LED headlights, Large-capacity dust cup, HEPA filter, Hose with wand, Cleaning attachments (crevice tool, upholstery tool, pet hair tool), Power cord with wrap.

Feature	Description
Anti-Hair Wrap Technology	Prevents hair from tangling around brushroll
HEPA Filtration System	Captures 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	1.5L capacity for fewer emptyings
Motorized Brushroll	Deep cleans carpets and hard floors
Cleaning Modes	CARPET, HARD FLOOR, and MAX modes
Attachments	Crevice tool, upholstery tool, pet hair tool
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors
Cord Wrap	Integrated cord storage

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into body until it clicks into place.
Install hose and wand: Connect hose to front port; attach wand to hose.
Attach cleaning tools: Store tools on dock or attach to wand as needed.
Install filter: Ensure HEPA filter is properly seated in dust cup lid.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select surface type: Use CARPET mode for carpets; HARD FLOOR mode for hard surfaces.
Adjust height: Vacuum auto-adjusts to carpet pile; manual override available.
Begin cleaning: Push vacuum forward and back in overlapping strokes.
Use attachments: Detach wand and tools for above-floor cleaning.
Empty dust cup: Press release button when full; dispose of debris.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum liquids.

Specifications

Model: Shark CarpetXpert HairPro Pet.
Power: 1200W motor.
Filtration: HEPA filter captures 99.9% of particles.
Dust Cup Capacity: 1.5 liters.
Cord Length: 25 feet.
Cleaning Modes: CARPET, HARD FLOOR, MAX.
Brushroll: Motorized with Anti-Hair Wrap technology.
Attachments: Crevice tool, upholstery tool, pet hair tool.
Power Source: 120V AC, 60Hz.
Weight: 15 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brushroll on/off button, Mode selector (CARPET/HARD FLOOR/MAX).

LED indicators: Power ON (green), Brushroll active (blue), MAX mode (red).

Settings: Height adjustment (auto/manual), Suction power (adjustable via mode selector).

Cleaning Modes & Attachments

CARPET mode: Activates brushroll for deep cleaning. HARD FLOOR mode: Turns off brushroll to prevent scattering debris. MAX mode: Maximum suction for heavy dirt.

Select mode based on surface.
For attachments: Detach wand, connect desired tool.
Pet hair tool: Use on upholstery and stairs.
Crevice tool: For tight spaces and edges.
Upholstery tool: For furniture and curtains.

Tip: Use MAX mode sparingly to conserve battery life on cordless models.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filter monthly: Rinse HEPA filter under cold water; air dry 24 hours.
Check brushroll: Remove hair and debris weekly.
Inspect hose and attachments for clogs.
Store in dry area; wrap cord neatly.

WARNING! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and attachments for blockages.
Brushroll not spinning	Hair wrap/obstruction	Unplug, remove brushroll, clear hair and debris.
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet.
Overheating	Clogged filter/full dust cup	Clean filter; empty dust cup; allow to cool 60 minutes.
LED lights not working	Battery/connection	Ensure vacuum is plugged in; check for loose connections.

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com