Shark CarpetXpert HairPro EX301BRN Vacuum Cleaner Manual

The Shark CarpetXpert HairPro EX301BRN is a powerful upright vacuum cleaner designed for deep carpet cleaning and efficient hair removal. It features a motorized brush roll, advanced anti-hair wrap technology, multiple suction settings, a large-capacity dust cup, HEPA filtration, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Motorized brush roll, Dust cup with HEPA filter, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Motorized Brush Roll	Deep cleans carpets and helps remove embedded dirt and pet hair
Anti-Hair Wrap Technology	Prevents hair from tangling around the brush roll
Suction Power Control	Adjustable settings for different floor types (High/Low)
Large Capacity Dust Cup	Easy-to-empty, bagless design
HEPA Filtration System	Captures 99.9% of dust and allergens
Above-Floor Cleaning Kit	Includes crevice tool, upholstery tool, and dusting brush
On-Board Tool Storage	Convenient storage for attachments on the vacuum
LED Headlights	Illuminates dark areas under furniture
Quick-Release Wand	Easy transition from floor to above-floor cleaning
Power Cord	Long 25-foot cord with cord wrap

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the handle: Align the handle with the main body until it clicks into place.
Install the dust cup: Push the dust cup into the slot until it locks.
Insert the filters: Place the pre-motor and HEPA filters into their designated compartments.
Attach the hose and wand: Connect the hose to the vacuum port and attach the wand.
Store attachments: Clip the crevice tool, upholstery tool, and dusting brush onto the onboard storage clips.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the vacuum into a standard 120V outlet. Turn on the power switch.

Select floor setting: Use the dial on the handle to choose between Carpet (High) and Hard Floor (Low) suction.
Adjust height (if applicable): Some models have a manual height adjustment lever for different carpet pile heights.
Begin vacuuming: Push the vacuum forward and pull back slowly for effective cleaning.
Use attachments: For above-floor cleaning, detach the wand and attach the desired tool.

CAUTION! Do not vacuum up large objects, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Model: CarpetXpert HairPro EX301BRN.
Power: 120V, 60Hz, 12 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 Liters.
Filtration: HEPA filter + pre-motor foam filter.
Brush Roll: Motorized, anti-hair wrap.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: 15 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main power switch located on the body. Handle controls: Suction power dial (High/Low), Brush roll on/off switch (for hard floors).

Indicator Lights: LED headlights activate automatically. Filter check light alerts when filters need cleaning.

Settings: Carpet mode (High suction, brush roll on). Hard Floor mode (Low suction, brush roll can be turned off). Above-floor mode (suction through hose and tools).

Using Attachments

For cleaning upholstery, stairs, ceilings, and tight spaces.

Turn off and unplug the vacuum.
Detach the wand from the main body.
Attach desired tool to the end of the wand or hose.
Plug in the vacuum, turn it on, and begin cleaning.
Crevice Tool: For corners, edges, and between cushions.
Upholstery Tool: For sofas, chairs, and curtains.
Dusting Brush: For delicate surfaces, blinds, and shelves.

Tip: Ensure tools are securely clicked into place before use to maintain suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Check and clean the brush roll monthly: Remove hair and debris wrapped around the roll.
Inspect the belt (if applicable): Replace if worn or damaged.
Clear blockages: Check hose, wand, and air paths if suction decreases.
Wipe exterior: Use a dry cloth to clean the vacuum body.

WARNING! Always unplug the vacuum before performing any maintenance. Do not use water on electrical parts.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

Turn off and unplug the vacuum.
Press the dust cup release button and lift the cup out.
Hold over a trash can and press the bottom release latch to open the door.
Gently tap to remove debris. Close the door securely.
Reinsert the dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in a well-ventilated area to minimize dust exposure.

Filter Care

Clean filters every 3 months for optimal performance.

Pre-motor Foam Filter: Rinse under cold water, squeeze out excess water, and air dry for 24 hours completely before reinstalling.
HEPA Filter: Tap gently to remove dust. Do not wash. Replace every 12-18 months or as needed.

IMPORTANT: Never operate the vacuum without both filters installed and completely dry.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. CarpetXpert and HairPro are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check outlet; ensure power switch is ON; check cord for damage.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and tools for blockages; clean filters.
Brush roll not spinning	Hair wrap/belt/switch	Clean hair from brush roll; check and replace belt if broken; ensure brush roll switch is ON for carpet mode.
Vacuum is overheating	Clog/filters	Turn off and unplug; let cool for 60 minutes; check for clogs; clean or replace filters.
Unusual noise	Foreign object	Turn off immediately; check brush roll, hose, and intake for obstructions.

Reset: Unplug, wait 60 minutes, check and clear all blockages, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com