Shark CarpetXpert EX205 Vacuum Cleaner Manual

The Shark CarpetXpert EX205 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brushroll, multiple suction settings, HEPA filtration, a large-capacity dust cup, LED headlights, and specialized attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized brushroll, Suction control dial, Dust cup with quick-release, HEPA filter, LED headlights, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Suction Control Dial	Adjusts power for different floor types (Carpet/Hard Floor)
Large Capacity Dust Cup	Easy-empty, bagless design
HEPA Filtration System	Traps 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Quick-Release Wand	Converts to handheld mode for above-floor cleaning
Crevice Tool	For tight spaces and corners
Upholstery Tool	Gentle cleaning for furniture and stairs
Dusting Brush	For delicate surfaces and dusting
Power Button	Turns vacuum cleaner on/off

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

Attach handle: Align handle with body until it clicks into place.
Install wand: Insert wand into socket on the back of the vacuum.
Attach hose: Connect hose to the port on the front of the vacuum body.
Install floor nozzle: Slide the motorized floor nozzle onto the vacuum until it locks.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, perform a quick check and setup.

Check filters: Ensure HEPA filter and pre-motor filter are properly seated.
Adjust height: Set carpet height dial to match your floor type (Low/Medium/High pile).
Select suction: Turn suction control dial to desired setting (Carpet or Hard Floor).
Power on: Press the power button; LED lights will illuminate.
Test attachments: Attach tools to wand for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark CarpetXpert EX205.
Power: 120V, 60Hz, 12 Amps.
Suction Power: Adjustable with Carpet/Hard Floor settings.
Filtration: HEPA filter with Anti-Allergen Complete Seal.
Dust Cup Capacity: 1.5 Liters.
Cord Length: 25 feet.
Attachments: Crevice tool, Upholstery tool, Dusting brush.
Warranty: 5-year limited warranty.
Weight: 15 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power button, Suction control dial (Carpet/Hard Floor), Wand release button.

Body: Dust cup release button, Brushroll on/off switch (for delicate rugs), Carpet height adjustment dial.

Settings: Suction (High for carpets, Low for hard floors), Brushroll (On for carpets, Off for hard floors), Height (adjust for carpet pile). Maintenance indicators: Filter check light (if equipped).

Using Attachments

For above-floor cleaning: detach wand and connect tools.

Turn off and unplug vacuum.
Press wand release button to detach handle and wand.
Attach desired tool (crevice, upholstery, dusting brush) to end of wand or hose.
Plug in vacuum and turn on to use.
To return to floor cleaning, reattach wand to vacuum body.

Tip: Use the upholstery tool for stairs and furniture; crevice tool for edges and corners.

Cleaning Modes

Supports carpet, hard floor, and above-floor cleaning.

Carpet Mode: Set suction to High, brushroll On, adjust height for carpet pile.
Hard Floor Mode: Set suction to Low, brushroll Off (or On for gentle agitation).
Above-Floor Mode: Use wand with attachments for furniture, curtains, ceilings.
Spot Cleaning: Use hose with appropriate tool for small spills and concentrated areas.
Edge Cleaning: Use side of floor nozzle to clean along baseboards.

WARNING! Do not vacuum wet spills, large debris, or sharp objects. Unplug before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is full or after each use.
Clean filters: Rinse HEPA filter and pre-motor filter every 3 months (air dry completely).
Clear brushroll: Cut away wrapped hair and fibers regularly; check for obstructions.
Inspect hose and wand: Remove clogs with long object if suction reduces.
Store properly: Wrap cord around cord hooks; store in dry area.

CAUTION! Always unplug before maintenance. Do not use damaged filters.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; check circuit breaker.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Obstruction/belt	Unplug and clear hair/debris from brushroll; check drive belt.
Overheating	Clogged filter/full cup	Allow to cool; clean filters; empty dust cup; check for obstructions.
Unusual noise	Foreign object	Unplug and inspect brushroll, hose, and nozzle for lodged items.

Reset: Unplug for 60 minutes if unit overheats.

Service: 1-800-798-7398; www.sharkclean.com