Shark CarpetXpert EX200 Vacuum Cleaner Manual

The Shark CarpetXpert EX200 is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a motorized brush roll, multiple suction settings, HEPA filtration, a large-capacity dust cup, LED headlights, swivel steering, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Motorized brush roll, Large-capacity dust cup with HEPA filter, LED headlights, Swivel steering, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Motorized brush roll	Deep cleans carpets and agitates embedded dirt
Suction control	Adjustable settings for different floor types
HEPA filtration	Traps 99.9% of dust and allergens
LED headlights	Illuminates dark areas under furniture
Swivel steering	Maneuvers easily around obstacles
Large dust cup	2.0-liter capacity for less frequent emptying
Attachments	Crevice tool, upholstery tool, dusting brush included
Power cord	25-foot length for extended reach
Washable filters	Easy to clean and maintain
Handle controls	On/off and brush roll switch at your fingertips

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install hose and wand: Connect hose to vacuum front; attach wand to hose.
Attach tools: Store crevice tool, upholstery tool, and dusting brush on wand clips.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep hands clear of brush roll during installation.

First-Time Use

Plug in vacuum; select appropriate settings.

Select floor setting: Use suction control dial for carpets (HIGH) or hard floors (LOW).
Turn on brush roll: For carpets, ensure brush roll switch is ON; for hard floors, turn OFF to prevent scattering debris.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Use attachments: Detach wand and select tool for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model: Shark CarpetXpert EX200.
Power: 12.0 amps, 120V AC, 60Hz.
Dust Cup Capacity: 2.0 liters.
Cord Length: 25 feet.
Filtration: HEPA filter, washable foam and felt filters.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: 15.4 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Handle controls: POWER button, Brush roll ON/OFF switch, Suction control dial.

Suction settings: HIGH for carpets, LOW for hard floors and delicate rugs. Brush roll: ON for carpets, OFF for hard floors to prevent debris scattering. LED lights: Automatically illuminate when vacuum is powered on.

Using Attachments

For above-floor cleaning: Detach wand from vacuum body.

Crevice tool: For tight spaces, corners, and along baseboards.
Upholstery tool: For sofas, chairs, stairs, and car interiors.
Dusting brush: For delicate surfaces, blinds, shelves, and electronics.

Tip: Ensure vacuum is upright and powered on when using attachments for maximum suction.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Check brush roll: Regularly remove hair and string wrapped around brush roll.
Inspect hose and wand: Clear any blockages to maintain suction.
Clean exterior: Wipe with a damp cloth; do not use abrasive cleaners.
Store properly: Wind cord around cord hooks; store in a dry place.

WARNING! Always unplug vacuum before performing any maintenance or cleaning.

Emptying the Dust Cup

Empty dust cup when it reaches the MAX fill line.

Press dust cup release button to detach from vacuum.
Hold over trash can; press bottom latch to open door and empty contents.
Close door securely until it clicks.
Reattach dust cup to vacuum until it clicks into place.

CAUTION! Empty dust cup outdoors or in a well-ventilated area to minimize dust exposure.

Filter Care

Clean filters every 3 months or as needed for maintained suction.

Remove HEPA filter: Open filter compartment; lift out filter.
Remove foam and felt filters: Located beneath HEPA filter.
Tap filters gently to remove loose dust.
Rinse with cold water (do not use soap); air dry completely for 24 hours before reinstalling.

IMPORTANT: Never operate vacuum without all filters installed and completely dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose/wand blockages.
Brush roll not spinning	Obstruction, belt issue, switch OFF	Clear debris from brush roll; check belt; ensure brush roll switch is ON.
Vacuum won't turn on	Power cord, outlet, or motor	Check power cord connection; try different outlet; contact support if motor fails.
Unusual noise	Foreign object in brush roll or hose	Turn off and unplug; inspect brush roll and hose for obstructions.
Dust escaping	Missing or damaged filters	Ensure all filters are installed, dry, and undamaged.

Reset: Unplug vacuum for 10 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com