Shark BH100 Series Vacuum Cleaner Manual

The Shark BH100 Series is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister for portable cleaning, Anti-Allergen Complete Seal Technology, a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, motorized floor nozzle, wand, hose, and accessory tools.

Feature	Description
Lift-Away Canister	Detachable for portable cleaning above floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles for improved air quality
Motorized Brushroll	Deep cleans carpets and automatically adjusts for hard floors
Cleaning Modes	Upright, Lift-Away, and Handheld modes
Accessory Storage	On-board storage for wands and tools
Power Switch	Turns vacuum on/off
Brushroll On/Off	Disengages brushroll for hard floors or delicate rugs
Suction Control	Adjusts suction power for different surfaces
Dust Cup Release	Button to empty the dust cup

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the wand: Insert the wand into the upright body until it clicks into place.
Connect the hose: Attach the hose to the port on the back of the vacuum body.
Install the floor nozzle: Slide the motorized nozzle onto the front of the upright body until it locks.
Attach accessories: Store the crevice tool, dusting brush, and upholstery tool in the provided caddy or on-board clips.
Plug into a standard 120V AC power outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are securely connected and the dust cup is empty.

Select cleaning mode: Choose Upright for floors or press the Lift-Away release button to detach the canister.
Adjust settings: For hard floors, turn off the motorized brushroll. For carpets, ensure it is on.
Begin cleaning: Plug in the vacuum, press the power switch, and push forward to clean.
Empty the dust cup: After use, press the release button and empty contents into a trash bin.

CAUTION! Do not vacuum large, hard objects or liquids. Keep hair and loose clothing away from the brushroll.

Specifications

Model Series: BH100 Series.
Type: Upright with Lift-Away canister.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Brushroll: Motorized, auto-adjusting for carpets/hard floors.
Dust Cup Capacity: [Specify volume, e.g., 1.0 dry quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool (varies by model).
Power Source: 120V AC, 60Hz.
Weight: [Specify weight, e.g., 15 lbs].

Controls and Settings

Main controls located on the vacuum body. Upright Body: POWER switch, LIFT-AWAY release button, BRUSHROLL ON/OFF switch. Canister Handle: SUCTION CONTROL slider, accessory release buttons.

Cleaning Modes: Upright (for floors), Lift-Away (for stairs, furniture, above-floor areas), Handheld (with tool attached directly to hose). Settings: Suction power (High/Low), brushroll engagement (On/Off).

Using Attachments

Attach tools to the wand or hose for specialized cleaning.

Detach the canister: Press the Lift-Away release button.
Select tool: Choose crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.
Connect: Insert tool into the end of the wand or hose.
Clean: Use the suction control to adjust power as needed.

Tip: Store attachments on the vacuum body for easy access.

Cleaning Modes

Three primary modes for versatile cleaning.

Upright Mode: For large carpeted and hard floor areas. Push vacuum forward and back.
Lift-Away Mode: Press release button to detach canister. Clean stairs, under furniture, and above floors.
Handheld Mode: Remove wand, attach tool directly to hose for spot cleaning.

WARNING! Always turn off and unplug the vacuum before switching modes or attaching/detaching parts.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Check and clean the filter monthly. Rinse HEPA filter with cold water every 3 months; air dry for 24 hours.
Inspect and remove debris from the brushroll weekly. Cut away wrapped hair or strings with scissors.
Wipe exterior with a dry cloth. Do not use liquids or abrasive cleaners.

CAUTION! Unplug vacuum before all maintenance. Never operate without filters installed.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup. Check and clean filters. Inspect hose and wand for blockages.
Brushroll not spinning	Debris wrapped around roll, mode setting	Turn off and unplug. Remove debris from brushroll. Ensure brushroll is set to ON.
Vacuum won't turn on	Power cord, outlet, switch	Check power cord connection. Test outlet. Ensure power switch is pressed firmly.
Canister won't detach	Release button not fully engaged	Ensure vacuum is upright and on a flat surface. Press release button firmly.
Unusual noise	Foreign object in brushroll or hose	Turn off immediately. Inspect brushroll chamber and hose for obstructions.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; sharkclean.com