Shark Bagless Stick Shark EP601 HEPA Vacuum Cleaner Manual

The Shark EP601 is a lightweight, corded stick vacuum cleaner featuring bagless cyclonic technology, a HEPA filter to capture 99.9% of dust and allergens, multiple cleaning modes for floors and above-floor surfaces, a motorized brushroll, a large-capacity dust cup, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Handle with controls, Telescopic wand, Motorized floor nozzle, HEPA filter, Dust cup with empty mechanism, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack all parts and inspect for damage.

1. Attach the handle: Align the handle with the top of the main body until it clicks into place.
2. Connect the wand: Insert the telescopic wand into the socket on the front of the vacuum until it locks.
3. Attach the floor nozzle: Push the wand into the floor nozzle until it clicks securely.
4. Install the HEPA filter: Remove the filter cover, insert the filter, and replace the cover.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are correctly assembled and the filter is installed.

1. Power on: Press the power button on the handle.
2. Select mode: Use the mode selector switch for Floor cleaning (brushroll on) or Hard Floor (brushroll off).
3. Adjust wand length: Press the wand release button and extend or retract to desired length.
4. Begin cleaning: Push vacuum forward and back slowly for effective cleaning.
5. Empty dust cup: When full, press the dust cup release button over a trash can.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark EP601 Bagless Stick Vacuum.
• Technology: Cyclonic with HEPA filtration.
• Filter Type: Washable HEPA filter.
• Dust Cup Capacity: 0.7 dry quarts.
• Cord Length: 25 feet.
• Cleaning Modes: Floor (carpet/hard floor), Above-Floor, Handheld.
• Attachments Included:Crevice tool, upholstery tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Weight: 7.5 lbs.

Controls and Settings

Handle Controls: Power button, Mode selector (Floor/Hard Floor/Off), Wand release button.

Main Body: Dust cup release button, Filter cover latch, Cord wrap hooks.

Floor Nozzle: Brushroll on/off switch (for hard floors), Headlight (on some models). Wand: Telescopic adjustment with lock. Attachments: Click-to-connect design for quick changes.

Using Attachments

For above-floor cleaning: Remove floor nozzle and attach desired tool directly to wand or handle.

1. Turn off and unplug vacuum before changing attachments.
2. Press the wand release button to detach the floor nozzle.
3. Connect crevice tool for tight spaces, upholstery tool for furniture, or dusting brush for shelves.
4. For handheld use, detach the wand and connect tool directly to the handle.

Tip: Store attachments on the onboard caddy when not in use.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Floor Mode (Carpet): Motorized brushroll agitates fibers. Use slow, overlapping passes.
2. Hard Floor Mode: Brushroll turns off to prevent scattering debris. Use for tile, wood, laminate.
3. Above-Floor Mode: Use with attachments for furniture, stairs, ceilings.
4. Handheld Mode: Detach wand for portable spot cleaning.

WARNING! Do not use hard floor mode on carpets. Always turn off before changing modes.

Maintenance & Filter Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use: Press release button and empty into trash.
2. Clean filter monthly: Remove HEPA filter, tap off loose dirt, rinse under cold water, and air dry for 24 hours completely before reinstalling.
3. Clear brushroll: Regularly remove hair and fibers wrapped around brushroll. Use scissors if necessary.
4. Check for blockages: Inspect wand, nozzle, and hose for obstructions if suction decreases.
5. Wipe exterior: Use a dry cloth to clean vacuum body.

CAUTION! Never use vacuum without filter. Ensure filter is completely dry before reuse.

Safety Information

Read all instructions before use. Unplug before maintenance. Do not use outdoors or on wet surfaces. Keep away from children. Do not vacuum flammable materials or sharp objects. Avoid pulling cord to disconnect.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and HEPA are trademarks. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com