Shark AZ913UKT Vacuum Cleaner Manual

The Shark AZ913UKT is a versatile corded upright vacuum cleaner featuring DuoClean technology, Anti-Hair Wrap brushroll, LED headlights, Lift-Away functionality for portable cleaning, and a HEPA filter system. It is designed for deep cleaning carpets and hard floors, with multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean floorhead, Lift-Away pod, wand, hose, and accessory set.

Feature	Description
DuoClean Technology	Combines bristle brushroll and soft roller for carpets and hard floors
Anti-Hair Wrap Brushroll	Prevents hair tangling on the brushroll
LED Headlights	Illuminates dark areas under furniture
Lift-Away Mode	Detachable pod for portable above-floor cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Multi-Surface Settings	Adjustable suction for carpets and hard floors
Accessory Storage	Crevice tool, dusting brush, and upholstery tool stored on board
Power Cord	7.5m cord with cord wrap
Dust Cup Capacity	0.9L easy-empty dust cup
Wand Release Pedal	Foot pedal for quick wand detachment

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

Attach the wand: Insert wand into vacuum body until it clicks.
Connect the hose: Attach hose to the rear port on the vacuum body.
Install floorhead: Align floorhead with wand and push until it locks.
Attach accessories: Store tools on the accessory caddy.
Plug into mains power: Ensure voltage matches local supply (220-240V).

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, fully unwind the power cord and check all connections.

Select floor setting: Use the dial on the floorhead for carpets or hard floors.
Power on: Press the power button on the main body.
Adjust suction: Use the suction control slider for delicate rugs.
Test attachments: Attach tools to the hose for above-floor cleaning.
Empty dust cup: After first use, empty the dust cup to maintain suction.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep vacuum on level surfaces.

Specifications

Model: Shark AZ913UKT.
Type: Corded upright vacuum with Lift-Away.
Motor Power: 700W.
Dust Cup Capacity: 0.9 litres.
Cord Length: 7.5 metres.
Filtration: HEPA filter, washable foam filter.
Floorhead: DuoClean with Anti-Hair Wrap technology.
Attachments: Crevice tool, dusting brush, upholstery tool.
Weight: 6.8 kg.
Power Supply: 220-240V, 50Hz.

Controls and Settings

Main controls located on vacuum body and handle.

On Body: Power button, suction control slider, dust cup release button, hose release button.

On Handle: Wand release pedal (foot-operated), floorhead dial (Carpet/Hard Floor).

Settings: Carpet mode (increased suction), Hard Floor mode (gentle suction), Lift-Away mode (detach pod for handheld cleaning). Accessory use: Attach tools directly to hose or wand.

Using Attachments

For above-floor cleaning, detach the Lift-Away pod or use tools with the hose.

Detach pod: Press the Lift-Away release button on the back.
Attach tool: Connect desired tool to the end of the hose or wand.
Select suction: Adjust slider for appropriate suction power.
Clean: Use crevice tool for edges, dusting brush for surfaces, upholstery tool for furniture.
Reattach: Return pod to main body until it clicks into place.

Tip: Ensure hose is fully extended and not twisted during use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove and empty cup after each use.
Clean filters: Remove HEPA and foam filters monthly; rinse with cold water and air dry for 24 hours.
Check brushroll: Remove floorhead and clear any debris from brushroll.
Inspect hose: Remove blockages by detaching hose and checking for obstructions.
Wipe surfaces: Use a dry cloth to clean vacuum exterior.

WARNING! Always unplug vacuum before maintenance. Do not use damaged filters.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store with wet filters. Keep away from heat sources and direct sunlight.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clogged filter	Empty dust cup; clean filters; check hose for blockages.
Brushroll not spinning	Hair or debris wrapped around brushroll	Turn off and unplug; remove floorhead and clear brushroll.
Vacuum won't turn on	Power cord not plugged in or faulty outlet	Check power connection; try different outlet.
Lift-Away pod not detaching	Release button not fully pressed	Press release button firmly while lifting pod.
Unusual noise	Blockage in hose or floorhead	Turn off and unplug; inspect hose, wand, and floorhead for obstructions.

Reset: Unplug for 30 minutes if motor overheats.

Service: 0800 862 0453; www.sharkclean.co.uk