Shark AV751 Vacuum Cleaner Manual

The Shark AV751 is a versatile robotic vacuum cleaner designed for automated floor cleaning. It features smart navigation, multiple cleaning modes, Wi-Fi connectivity, a self-emptying base, HEPA filtration, and compatibility with the SharkClean app. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Cleaning Modes & Scheduling 7. Maintenance & Care 8. App Connectivity 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Empty Base, Charging dock, Remote Control, Side brushes, HEPA filter, Dust bin.

Feature	Description
Smart Navigation	Uses sensors to map and navigate rooms efficiently
Self-Empty Base	Automatically empties dust bin into base for up to 30 days
HEPA Filtration	Traps 99.97% of dust and allergens
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Multiple Cleaning Modes	Auto, Spot, Edge, and Max modes
Voice Control	Works with Amazon Alexa and Google Assistant
Boundary Strips	Included to restrict access to specific areas
Auto-Recharge	Returns to base when battery is low
Dual Side Brushes	Sweeps debris from edges and corners
High-Efficiency Filter	Washable and reusable

Unpacking & Setup

Unpack and inspect all components. Place base on level surface.

Install side brushes: Attach to bottom of robot until they click into place.
Position charging base: Place against wall in open area, clear of obstacles.
Charge robot: Place robot on charging contacts; ensure power indicator lights.
Install app: Download SharkClean app from App Store or Google Play.

WARNING! Keep base and robot away from stairs and wet areas. Ensure charging area is dry.

First-Time Configuration

Power on robot; follow app prompts for setup.

Connect to Wi-Fi: Use app to connect robot to 2.4GHz network.
Name your robot: Assign a unique name in app for identification.
Initial mapping run: Start cleaning to allow robot to map your home.
Set no-go zones: Use app or boundary strips to restrict areas.
Schedule cleaning: Set daily or weekly cleaning schedules via app.

CAUTION! Remove small objects, cords, and loose rugs before first run.

Specifications

Model: Shark AV751.
Type: Robotic vacuum with self-empty base.
Navigation: Smart sensor navigation with room mapping.
Battery: Lithium-ion, up to 90 minutes runtime.
Dust Capacity: 30-day capacity in base.
Filtration: HEPA filter, washable.
Connectivity: Wi-Fi 2.4GHz, SharkClean app.
Voice Control: Amazon Alexa, Google Assistant.
Cleaning Modes: Auto, Spot, Edge, Max.
Power Source: 120V AC, 60Hz.
Weight: 7.5 lbs (robot), 10 lbs (base).

Controls and Indicators

Robot top: CLEAN, HOME, SPOT, Wi-Fi indicator. Base: Power indicator, Empty bin indicator.

Remote: CLEAN, HOME, SPOT, EDGE, MAX, SCHEDULE.

App controls: Start/stop, mode selection, scheduling, mapping, no-go zones. Indicators: Blue (Wi-Fi connected), Green (charging), Red (error/low battery).

Cleaning Modes & Scheduling

Auto: Cleans entire mapped area. Spot: Intensive clean in 3-foot diameter. Edge: Focuses on walls and edges. Max: Maximum suction for carpets.

Select mode via app, remote, or robot buttons.
Schedule: Set time and frequency in app.
Manual start: Press CLEAN on robot or app.
Pause/resume: Press CLEAN again or use app.

Tip: For best results, run in Auto mode first to complete mapping.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust bin: After each run or when indicator lights.
Clean brushes: Remove hair and debris from main brush weekly.
Wash filter: Rinse HEPA filter every month; air dry completely.
Clean sensors: Wipe sensors with dry cloth.
Check side brushes: Replace if worn or damaged.
Clean charging contacts: Wipe with dry cloth.

WARNING! Unplug base before maintenance. Do not use wet cloth on robot.

App Connectivity

SharkClean app features: Remote control, scheduling, cleaning history, map view, no-go zones, software updates.

Download app from App Store or Google Play.
Create account and add robot.
Follow in-app instructions to connect to Wi-Fi.
Use app to control cleaning and monitor status.

Note: App requires 2.4GHz Wi-Fi network; 5GHz not supported.

Safety Information

Read all instructions before use. Keep away from children and pets. Do not use on wet surfaces. Unplug when not in use for extended periods.

CAUTION! Do not modify charger or use damaged cords. Avoid stairs and drop-offs.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Contacts dirty/base unplugged	Clean charging contacts; ensure base is plugged in.
Poor navigation	Sensors dirty/obstructed	Clean sensors; remove obstacles from path.
App not connecting	Wi-Fi issues	Ensure 2.4GHz network; restart robot and router.
Low suction	Full dust bin/clogged filter	Empty dust bin; clean or replace filter.
Robot stuck	Obstacles in path	Clear area; use boundary strips to restrict access.
Error beeps	Brush jammed/wheel issue	Check and clear brushes/wheels; restart robot.

Reset: Hold CLEAN and HOME buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; www.sharkclean.com