Shark APEX Z1002 Vacuum Cleaner Manual

The Shark APEX Z1002 is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and versatile floor-to-ceiling cleaning capabilities. It includes multiple attachments for above-floor cleaning and is designed for homes with carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal system, LED headlights, large dust cup, wand, hose, and multiple cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the handle: Insert handle into body until it clicks into place.
2. Install the wand: Insert wand into hose connection until secure.
3. Attach floor nozzle: Connect nozzle to wand or hose end.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in vacuum; turn on power switch.

1. Select surface setting: Use brush roll control for carpets (ON) or hard floors (OFF).
2. Adjust handle height: Set to comfortable position for your height.
3. Begin cleaning: Push vacuum forward and back in overlapping strokes.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark APEX Z1002.
• Technology: DuoClean with Anti-Allergen Complete Seal.
• Power: Corded electric, 120V AC, 60Hz.
• Dust Cup Capacity: 1.5 quarts.
• Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
• Hose Length: 7 feet.
• Cord Length: 30 feet.
• Weight: 15.2 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brush roll control, wand release button. Body: Dust cup release, hose connection.

Settings: Brush roll ON for carpets, OFF for hard floors/delicate rugs. Handle height adjustment (multiple positions). Suction power (single speed).

Maintenance indicators: Check filter light (if equipped). Empty dust cup when full.

Using Attachments

For above-floor cleaning: detach wand and connect desired tool.

1. Turn off and unplug vacuum.
2. Press wand release to detach wand from floor nozzle.
3. Attach tool to end of wand or hose (crevice, dusting brush, upholstery).
4. Plug in and turn on to use.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes

Upright mode: For floors and carpets. Handheld mode: For stairs, furniture, ceilings.

1. Convert to handheld: Detach wand from floor nozzle; attach desired tool directly to hose.
2. Adjust suction: No adjustable suction; single speed only.
3. Clean under furniture: Use LED headlights to see in dark areas.
4. Clean edges: Use crevice tool along baseboards.

WARNING! Do not use vacuum to pick up sharp objects or fine dust like drywall dust.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filters: Rinse foam and felt filters monthly; air dry completely.
3. Check brush roll: Remove debris wrapped around brush roll regularly.
4. Inspect hose and attachments: Clear clogs if suction decreases.

CAUTION! Unplug before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com