Shark APEX UpLight Lift-Away QU602QBK Vacuum Cleaner Manual

The Shark APEX UpLight Lift-Away QU602QBK is a versatile upright vacuum cleaner featuring DuoClean technology, LED headlights, a lift-away pod for portable cleaning, anti-allergen complete seal with HEPA filter, powered floor nozzle, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean PowerFins floor nozzle, LED headlights, Lift-Away pod, Anti-Allergen Complete Seal with HEPA filter, Powered Hand Tool, Crevice Tool, Duster Crevice Tool, Pet Multi-Tool, Storage Caddy.

Feature	Description
DuoClean PowerFins	Combines a soft roller and bristle brush for deep carpet cleaning and hard floor pickup
LED Headlights	Illuminates dark areas under furniture
Lift-Away Pod	Detachable canister for portable cleaning above floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles and allergens
Powered Hand Tool	Motorized brush for upholstery and stairs
Storage Caddy	Holds all attachments on the vacuum
Power Switch	Turns vacuum on/off
Floor Selector	Adjusts brushroll speed for carpets vs. hard floors
Handle Release	Releases pod from upright mode

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install wand: Insert wand into handle socket and twist to lock.
Attach floor nozzle: Connect wand to floor nozzle until it clicks.
Install filters: Place HEPA filter and pre-motor filter in their compartments.
Charge battery (if cordless model): Plug charger into wall and connect to vacuum.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in power cord (if corded) or ensure battery is charged.

Select floor type: Use floor selector switch for carpets or hard floors.
Turn on: Press power switch; LED lights will illuminate.
Adjust suction: Use suction control dial if available.
Begin cleaning: Push vacuum forward and back slowly for best results.
Use Lift-Away mode: Press release button to detach pod for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: QU602QBK
Type: Upright with Lift-Away pod
Technology: DuoClean with PowerFins
Filtration: Anti-Allergen Complete Seal with HEPA filter
Attachments: Powered Hand Tool, Crevice Tool, Duster Crevice Tool, Pet Multi-Tool
Cord Length: 25 feet (corded models)
Dust Cup Capacity: 0.9 quarts
Power Source: 120V AC, 60Hz (corded)
Weight: 15.2 lbs

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Suction control dial (if equipped), Floor selector switch (Carpet/Hard Floor).

Body: Handle release button, Dust cup release button, Brushroll on/off switch (for hard floors).

Settings: Carpet mode (higher brushroll speed), Hard Floor mode (lower brushroll speed), Suction control (adjustable on some models). Lift-Away mode: Detach pod for portable cleaning using attachments.

Using Attachments

Attachments stored on caddy; connect to wand or pod.

Detach wand from floor nozzle.
Choose attachment: Crevice Tool for tight spaces; Duster Crevice Tool for surfaces; Pet Multi-Tool for pet hair; Powered Hand Tool for upholstery.
Connect to wand or directly to pod hose.
Turn on vacuum; use as needed.

Tip: For Powered Hand Tool, ensure it's securely connected and brushroll is spinning.

Cleaning Modes

Three main modes: Upright, Lift-Away, Handheld.

Upright mode: For floor cleaning with floor nozzle attached.
Lift-Away mode: Press release button to detach pod; carry while cleaning above floors.
Handheld mode: Remove wand and use pod with short hose for quick cleanups.
Above-floor cleaning: Use attachments with wand in Lift-Away mode.
Under furniture: LED lights illuminate dark areas.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
Clear brushroll: Remove debris from brushroll regularly.
Check for clogs: Inspect hose, wand, and nozzles if suction decreases.
Store properly: Wind cord around hooks; store attachments on caddy.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/battery	Check power outlet; ensure cord is plugged in; charge battery if cordless.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzles for clogs; clean filters.
Brushroll not spinning	Debris/worn belt	Clear debris from brushroll; inspect and replace belt if necessary.
Vacuum overheats	Clog/full dust cup	Turn off and unplug; let cool; check for clogs; empty dust cup.
Attachments not working	Improper connection	Ensure attachments are fully inserted and locked into place.

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com