Shark Apex UpLight Lift-Away DuoClean QU603Q Series Vacuum Cleaner Manual

The Shark Apex UpLight Lift-Away DuoClean QU603Q Series is a versatile vacuum cleaner featuring DuoClean technology with a soft roller for fine dust and a bristle brush for deep cleaning, UpLight LED headlights to illuminate dark areas, Lift-Away functionality for portable cleaning above the floor, Anti-Allergen Complete Seal technology, and a swivel steering handle. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Components 6. Using Lift-Away Mode 7. Cleaning Different Surfaces 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, UpLight LED headlights, Lift-Away pod with handle, HEPA filter, Dust cup, Hose with wand, and various attachments.

Feature	Description
DuoClean Technology	Combines soft roller for hard floors and bristle brush for carpets
UpLight LED Headlights	Illuminates dark areas under furniture
Lift-Away Mode	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Swivel Steering	Maneuvers easily around furniture and obstacles
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Large Dust Cup	Easy-to-empty, bagless design
Attachments Included	Pet Multi-Tool, Crevice Tool, Upholstery Tool, Duster Crevice Tool
POWER Button	Turns vacuum on/off
Brushroll Control	Engages/disengages motorized brushroll

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the wand: Insert the wand into the floor nozzle until it clicks.
Connect the hose: Attach the hose to the pod and secure the wand to the hose clip.
Install the handle: Slide the handle onto the Lift-Away pod until it locks.
Attach desired tool: Click accessory onto the end of the wand or hose.
Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll during assembly.

First-Time Use

Before first use, ensure the dust cup is empty and filters are installed.

Power on: Press the POWER button on the handle.
Select mode: Use the floor selector switch on the nozzle for carpets or hard floors.
Adjust suction: Use the suction control slider on the handle for different surfaces.
Engage brushroll: Press the brushroll button to activate/deactivate for rugs or delicate floors.
Empty dust cup: Press release button to detach and empty when full.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Ensure the area is clear of cords and small objects.

Specifications

Model: QU603Q Series.
Technology: DuoClean with motorized brushroll.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Lighting: UpLight LED headlights on floor nozzle.
Modes: Upright and Lift-Away portable.
Attachments:Pet Multi-Tool, Crevice Tool, Upholstery Tool, Duster Crevice Tool.
Cord Length: 30 feet.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty.

Controls and Components

Main unit: POWER button, suction control, brushroll button, floor selector. Lift-Away pod: Handle release, hose connector, dust cup release.

Attachments: Pet Multi-Tool for hair and debris, Crevice Tool for tight spaces, Upholstery Tool for furniture, Duster Crevice Tool for shelves.

Settings: Suction control (Low/High), floor selector (Carpet/Hard Floor), brushroll on/off. Maintenance: Dust cup indicator, filter check light, brushroll access latch.

Using Lift-Away Mode

Detach the pod for cleaning stairs, furniture, and above-floor areas.

Press the release button on the back of the pod.
Lift the pod away from the floor nozzle.
Use the hose and wand with attachments for portable cleaning.
Reattach by aligning the pod with the floor nozzle and pressing down until it clicks.

Tip: Use the shoulder strap (if included) for easier carrying in Lift-Away mode.

Cleaning Different Surfaces

Adjust settings based on floor type for optimal cleaning.

Hard floors: Set floor selector to hard floor; brushroll can be on or off.
Carpets: Set to carpet; ensure brushroll is engaged.
Area rugs: Use suction control on high; test on corner first.
Above floors: Use Lift-Away mode with appropriate attachment.
Upholstery: Use Upholstery Tool with gentle suction.
Pet hair: Use Pet Multi-Tool on furniture and carpets.

WARNING! Do not use on wet surfaces. Avoid vacuuming cords or loose objects that could damage the brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse HEPA filter and foam filter every 3 months; air dry completely.
Clear brushroll: Remove debris from brushroll weekly; press latch to access.
Check hose and attachments: Remove clogs with a long object.
Inspect cord: Ensure cord is not damaged; store properly.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters or brushroll.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris or belt issue	Clear debris from brushroll; check belt for wear and replace if needed.
Vacuum shuts off	Overheating or clog	Unplug and let cool for 60 minutes; clear any clogs in hose or nozzle.
Unusual noise	Foreign object in brushroll or motor	Turn off and unplug; inspect brushroll and hose for obstructions.
LED lights not working	Connection or bulb issue	Ensure floor nozzle is properly connected; contact support if lights are faulty.

Reset: Unplug for 10 minutes if vacuum overheats.

Service: 1-800-798-7398; sharkclean.com