Shark APEX AZ1500 Series Vacuum Cleaner Manual

The Shark APEX AZ1500 Series is a powerful upright vacuum cleaner featuring DuoClean floor nozzle technology, Anti-Allergen Complete Seal technology with HEPA filter, LED headlights, powered lift-away capability for above-floor cleaning, and a variety of specialized attachments. This manual covers safety, features, assembly, operation, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Emptying the Dust Cup 9. Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Powered lift-away pod, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, Crevice tool, Upholstery tool, Dusting brush, Pet multi-tool.

Feature	Description
DuoClean Floor Nozzle	Combines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles; washable and reusable
Powered Lift-Away	Detachable pod for portable above-floor cleaning
LED Headlights	Illuminates dark areas under furniture
Attachments	Specialized tools for crevices, upholstery, and dusting
Power Switch	Turns vacuum on/off
Brush Roll On/Off	Disengages brush roll for hard floors
Handle Release	Releases wand for extended reach
Dust Cup Release	Opens bottom door to empty debris

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach handle: Insert handle into top of vacuum body until it clicks.
Attach wand: Insert wand into handle until it locks.
Attach floor nozzle: Connect nozzle to wand or lift-away pod.
Install filters: Ensure HEPA and pre-motor filters are in place.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed and dust cup is empty.

Select surface setting: Use brush roll on for carpets; off for hard floors.
Adjust suction: Use power switch for standard or max suction.
Use lift-away: Press release button to detach pod for stairs or furniture.
Attach tools: Connect crevice or upholstery tool as needed.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brush roll.

Specifications

Model Series: APEX AZ1500.
Technology: DuoClean, Anti-Allergen Complete Seal.
Filtration: HEPA filter, washable foam and felt filters.
Attachments: Crevice tool, upholstery tool, dusting brush, pet multi-tool.
Cord Length: 25 feet.
Dust Cup Capacity: 0.9 quarts.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brush roll on/off button. Body: Handle release, dust cup release, lift-away release.

Settings: Power (On/Off), Brush Roll (On for carpets/Off for hard floors), Suction (Standard/Max). LED lights automatically illuminate when vacuum is on.

Maintenance indicators: Check filter light alerts when filters need cleaning. Empty dust cup light indicates full dust cup.

Using Attachments

Attachments store on back of vacuum. To use:

Detach wand: Press handle release button.
Select tool: Crevice for tight spaces; upholstery for furniture; dusting brush for surfaces.
Attach to wand: Insert until click is heard.
Clean: Use powered suction for debris removal.

Tip: For pet hair, use pet multi-tool with brush roll engaged.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Unplug vacuum before any maintenance.
Check brush roll: Remove debris wrapped around brush roll monthly.
Inspect hose and wand: Clear any blockages.
Wipe exterior: Use dry cloth to clean vacuum body.

WARNING! Do not use water on electrical parts. Ensure vacuum is completely dry before use.

Emptying the Dust Cup

Empty dust cup when full or after each use.

Press dust cup release button at top of cup.
Hold over trash can; press bottom door release to open.
Tap gently to remove debris.
Close door securely until click is heard.
Reattach dust cup to vacuum.

CAUTION! Empty dust cup outdoors if possible to minimize allergen exposure.

Filter Care

Filters require regular cleaning for maximum efficiency.

HEPA filter: Remove and rinse under cold water every 3 months. Air dry for 24 hours.
Pre-motor foam and felt filters: Rinse monthly; air dry completely.
Reinstall filters only when completely dry.

Note: Do not use vacuum without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinning	Debris wrap or belt issue	Clear debris from brush roll; check belt for damage.
Vacuum shuts off	Overheating or filter clog	Turn off; let cool for 60 minutes. Clean filters.
LED lights not working	Power connection	Ensure vacuum is plugged in and power switch is on.
Unusual noise	Foreign object in airway	Unplug; inspect nozzle, hose, and wand for obstructions.

Reset: Unplug for 60 minutes to reset thermal cutoff.

Service: 1-800-798-7398; sharkclean.com