Shark Anti Hair Wrap & DuoClean with Powered Lift-Away ICZ260UK Series Vacuum Cleaner Manual

The Shark ICZ260UK Series is a versatile corded upright vacuum cleaner featuring Anti-Hair Wrap technology to prevent hair tangles in the brushroll, DuoClean floor nozzle for dual-surface cleaning (hard floors and carpets), and a Powered Lift-Away mode for portable above-floor cleaning. It includes a HEPA filter, various attachments, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with handle and controls, DuoClean floor nozzle, Powered Lift-Away pod, Crevice tool, Upholstery tool, Dusting brush, HEPA filter, and power cord.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the handle: Insert the handle into the main body until it clicks securely into place.
2. Connect the hose: Push the hose connector into the socket on the front of the vacuum until it locks.
3. Attach the floor nozzle: Align the nozzle with the vacuum body and push until it clicks.
4. Install accessories: Store the crevice tool, upholstery tool, and dusting brush on the pod's caddy.
5. Plug into a wall outlet: Ensure the power cord is fully unwound before use.

WARNING! Ensure all parts are securely connected before operation to prevent damage or injury.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

1. Select cleaning mode: Use the floor selector switch on the nozzle for Hard Floor or Carpet.
2. Power on: Press the POWER button on the handle.
3. Adjust suction: Use the suction control slider on the handle if available.
4. Engage brushroll: Press the brushroll button to activate for carpets; disengage for delicate rugs.
5. For above-floor cleaning: Press the Lift-Away release button to detach the pod.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model Series: ICZ260UK.
• Technology: Anti-Hair Wrap, DuoClean, Powered Lift-Away.
• Filtration: HEPA filter system.
• Dust Cup Capacity: 0.8 litres.
• Cord Length: 8 metres.
• Cleaning Modes: Hard Floor, Carpet, Lift-Away (motorized).
• Attachments Included: Crevice tool, Upholstery tool, Dusting brush.
• Power Source: 220-240V AC, 50Hz.
• Weight: 6.5 kg (approx).

Controls and Settings

Main controls located on the handle and body. Handle: POWER button, suction control slider, brushroll on/off button. Body: Lift-Away release button, floor mode selector on nozzle.

Indicator Lights: LED lights on nozzle indicate power and brushroll status.

Cleaning Modes: Hard Floor (brushroll spins slowly), Carpet (brushroll spins at full speed), Lift-Away (detached pod with motorized brush). Suction Control: Adjust suction power for different surfaces. Brushroll Control: Turn brushroll on/off for delicate rugs or hard floors.

Cleaning Modes & Attachments

Upright Mode: For floors with DuoClean nozzle. Lift-Away Mode: Detach pod for stairs, furniture, ceilings.

1. Select attachment based on surface: Crevice tool for tight spaces; upholstery tool for sofas; dusting brush for shelves.
2. Attach tool: Insert into the end of the hose or wand until it clicks.
3. Use suction control: Reduce suction for delicate fabrics.

Tip: For high-pile carpets, use Carpet mode and make slow, overlapping passes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Check brushroll monthly: Remove debris and cut away any wrapped hair (with power off and unplugged).
2. Inspect hose and nozzles: Clear blockages using a long, flexible object.
3. Wipe exterior: Use a dry cloth to clean the vacuum body and attachments.
4. Store properly: Wind cord around cord hooks; store in a dry place.

WARNING! Always unplug the vacuum before performing any maintenance.

Emptying the Dust Cup

Empty dust cup when it reaches the MAX fill line or after each use.

1. Press the dust cup release button to detach it from the vacuum.
2. Hold over a bin and press the bottom release latch to open the door.
3. Tap gently to remove all debris.
4. Close the door securely and reattach the dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in a well-ventilated area to minimize dust exposure.

Filter Care

HEPA filter and pre-motor filter require regular cleaning.

HEPA Filter: Rinse under cold water every 3 months. Allow to air dry for 24 hours completely before reinstalling. Pre-motor Filter: Tap gently to remove dust; rinse if very dirty. Dry completely. Never operate the vacuum without filters installed.

Regulatory Information

Complies with EU directives for electrical equipment. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste. Recycle according to local regulations. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 0800 862 0453; www.sharkclean.co.uk