Shark AI Ultra RV2600WDEU Vacuum Cleaner Manual

The Shark AI Ultra RV2600WDEU is a self-emptying robot vacuum with AI Laser Navigation, Matrix Clean Navigation, Home Mapping, No-Go Zones, and a self-cleaning brushroll. It features a HEPA filtration system, Wi-Fi connectivity, voice control compatibility (Alexa & Google Assistant), and a large-capacity self-empty base. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the SharkClean App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Empty Base, Charging Dock, Power Adapter, Side Brushes, Filter, and Remote Control.

Feature	Description
AI Laser Navigation	Scans and maps your home for efficient cleaning paths
Matrix Clean Navigation	Systematic cleaning pattern for full floor coverage
Self-Empty Base	Automatically empties robot's dustbin into a sealed bag
HEPA Filtration	Captures 99.97% of dust and allergens
Self-Cleaning Brushroll	Anti-hair wrap technology prevents tangles
Wi-Fi & App Control	Control and schedule via SharkClean app
Voice Control	Works with Alexa and Google Assistant
No-Go Zones	Set virtual boundaries in the app
Recharge & Resume	Automatically returns to dock to recharge, then resumes cleaning
Multi-Surface Cleaning	Automatically adjusts suction for carpets and hard floors

Unpacking and Setup

Unpack and inspect all contents. Place on a flat, stable surface.

Install Side Brushes: Snap onto the bottom of the robot.
Charge the Robot: Place robot on the charging dock; ensure power is connected.
Install Self-Empty Base: Place base against a wall, clear of obstacles (at least 3 feet on each side, 5 feet in front).
Connect Power: Plug the base power adapter into a wall outlet.
Install Bag: Open base lid, insert the disposable dust bag.

WARNING! Keep hair, loose clothing, fingers, and feet away from vacuum openings. Do not use if cord or plug is damaged.

First-Time Use

Fully charge the robot before first use (approx. 6 hours).

Clear the Area: Pick up cords, small objects, and clutter.
Map Your Home: Press CLEAN on the robot or app; allow it to complete a full cleaning run to create a map.
Set Up Wi-Fi: Download SharkClean app, follow in-app instructions to connect to your home network.
Create Schedule: Use app to set daily or weekly cleaning schedules.
Set No-Go Zones: In the app, mark areas you want the robot to avoid.

CAUTION! Do not place the dock in direct sunlight or wet areas. Ensure the dock's sensors are clean and unobstructed.

Specifications

Model: Shark AI Ultra RV2600WDEU
Type: Self-Emptying Robot Vacuum
Navigation: AI Laser Vision with Home Mapping
Dustbin Capacity (Robot): 0.5 Liters
Base Capacity: 30-Day capacity with sealed bag
Filtration: HEPA Filter
Battery: Lithium-ion, Recharge & Resume feature
Connectivity: Wi-Fi 2.4 GHz, SharkClean App
Voice Control: Amazon Alexa, Google Assistant
Power Source: 100-240V AC, 50/60Hz
Operating Time: Up to 120 minutes (varies by floor type)

Controls and Indicators

Robot Buttons: CLEAN (Start/Pause), DOCK (Return to Base), SPOT CLEAN (Clean a concentrated area).

Robot LED Indicators: Power/Status (Blue/Red/White), Error Codes.

Base Indicators: Power (White), Bag Full (Red), Wi-Fi (Blue), Error (Flashing Red).

App Controls: Start/Pause, Docking, Cleaning Modes (Eco, Normal, Max), Mapping, No-Go Zones, Scheduling, History.

Remote Control: CLEAN, DOCK, SPOT, ROOM SELECT (if mapped).

Using the SharkClean App

Download from Apple App Store or Google Play Store.

Create Account: Register with email.
Add Device: Follow prompts to connect robot to Wi-Fi.
Home Mapping: Robot will create a map on its first full run.
Customize Map: Name rooms, set No-Go Zones, select specific rooms to clean.
Schedule: Set daily or weekly cleaning times.
Notifications: Get alerts for completed jobs, errors, or full dustbag.

Tip: Ensure your phone is connected to a 2.4 GHz Wi-Fi network during setup.

Cleaning Modes and Scheduling

Supports multiple cleaning modes and scheduling via app.

Start Cleaning: Press CLEAN on robot, app, or remote.
Cleaning Modes: Select in app – Eco (Quiet), Normal (Balanced), Max (High Suction).
Room Select: Clean specific rooms from the map.
Spot Clean: Robot cleans a 3x3 foot area.
Schedule: Set recurring cleanings (e.g., daily at 10 AM).
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then resumes.

WARNING! Do not pick up or move the robot while it is cleaning. Allow it to complete its cycle or dock first.

Maintenance and Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty Robot Dustbin	After each cleaning cycle	Press release button, empty into trash.
Check & Replace Base Bag	When base indicator is red	Open lid, remove full bag, insert new one.
Clean Filter	Every month	Remove filter from robot, tap out dust. Do not wash.
Clean Brushes	Every week	Remove brushroll and side brushes, clear hair/debris.
Clean Sensors & Charging Contacts	Every month	Wipe with dry cloth.
Clean Wheels	As needed	Remove debris from wheel axles.

CAUTION! Unplug base before performing any maintenance. Do not use water or liquids to clean electrical parts.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003 Compliance: Class B digital apparatus. Copyright © SharkNinja Operating LLC. Shark and SharkNinja are registered trademarks. For support, visit sharkclean.com/support or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/Not docked	Place on dock to charge. Ensure dock is powered.
Robot missing spots	Obstructed sensors/brushes	Clean sensors, side brushes, and brushroll. Clear floor clutter.
Robot not returning to dock	Obstacles in path/Dock sensors dirty	Clear path to dock. Clean dock's front sensors and robot's charging contacts.
App connection failed	Wi-Fi issues/Incorrect setup	Ensure 2.4 GHz network. Reboot robot and router. Re-run app setup.
Suction power is low	Full dustbin/Clogged filter	Empty robot dustbin. Check and clean filter.
Error beeps/flashing light	Brush stuck/Wheel issue	Turn off robot, clear any jammed debris from brushes or wheels.
Base not emptying robot	Full bag/Blockage	Replace bag if indicator is red. Check hose for clogs.

Reset: Hold CLEAN and DOCK buttons on robot for 10 seconds to reset Wi-Fi settings.

Service: 1-800-798-7398; sharkclean.com/support