Shark AI ROBOT RV2001BRN Series Vacuum Cleaner Manual

The Shark AI ROBOT RV2001BRN Series is a smart robotic vacuum cleaner featuring AI Laser Navigation, Matrix Clean™ grid pattern cleaning, Home Mapping, self-emptying base with HEPA filtration, voice control compatibility (Alexa/Google Assistant), multi-surface brushroll, cliff sensors, recharge & resume, and app control via the SharkClean app. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the SharkClean App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Self-Emptying Base 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Charging Dock, Side Brushes, Filter, Remote Control, Power Adapter.

Feature	Description
AI Laser Navigation	360° scanning for precise home mapping and obstacle avoidance
Matrix Clean™	Cleans in a grid pattern for complete floor coverage
Self-Emptying Base	Holds up to 30 days of dirt; HEPA filtration
Home Mapping	Creates a map of your home for room-specific cleaning
Voice Control	Works with Alexa and Google Assistant
SharkClean App	Schedule cleanings, select rooms, view cleaning history
Recharge & Resume	Automatically returns to dock to recharge, then resumes cleaning
Multi-Surface Brushroll	Adjusts for carpets and hard floors
Cliff Sensors	Prevents falls down stairs
Boundary Strips	Included to set no-go zones

Unpacking & Setup

Unpack and inspect all contents. Place base on a level surface against a wall.

Install Side Brushes: Snap onto the bottom of the robot.
Charge the Robot: Place robot on the charging dock in the base. Ensure power is connected.
Prepare Your Home: Clear floor of cords, small objects, and fragile items.
Install the App: Download "SharkClean" from your device's app store.
Connect to Wi-Fi: Follow in-app instructions to connect robot to your home network.

WARNING! Keep hair, loose clothing, fingers, and feet away from brushroll and side brushes during operation.

First-Time Use

Fully charge the robot before first use (approx. 6 hours).

Create a Home Map: Press CLEAN or use the app to start a full cleaning cycle. The robot will map your home.
Name Your Rooms: In the app, edit the map to label rooms (Living Room, Kitchen, etc.).
Set Up No-Go Zones: Use the app or physical boundary strips to block off areas.
Schedule Cleaning: Set a daily or weekly schedule in the app.

CAUTION! Do not pick up or move the robot while it is cleaning or mapping.

Specifications

Model: RV2001BRN Series.
Navigation: AI Laser Vision.
Dustbin Capacity (Robot): 0.5 Liters.
Base Capacity: 30 days (approx. 4.5 Liters).
Filtration: HEPA Filter in Base.
Battery: Lithium-ion, Recharge & Resume.
Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
Compatibility: Amazon Alexa, Google Assistant.
Power Source: 120V AC, 60Hz.
Operating Time: Up to 120 minutes per charge.

Controls and Indicators

Robot Top Buttons: POWER (On/Off), CLEAN/PAUSE, DOCK (Return to Base), SPOT CLEAN.

LED Indicators:
Blue (Solid): Charging.
Blue (Pulsing): Cleaning.
Red: Error or low battery.
White: Connected to Wi-Fi.

Remote Control: CLEAN, DOCK, SPOT, ROOM SELECT, MAX (for deep clean).

App Controls: Start/Stop, Schedule, Room Select, History, Map Editing, Voice Control Setup.

Using the SharkClean App

Control your robot remotely and access advanced features.

Download & Login: Install "SharkClean" and create an account.
Add Your Robot: Tap '+' and follow prompts to connect to Wi-Fi.
View the Map: See real-time cleaning progress and the map of your home.
Edit the Map: Split/merge rooms, label them, set no-go zones.
Schedule: Set daily or weekly cleanings for specific rooms or the whole house.
History: View past cleaning sessions with duration and area covered.

Tip: Ensure your robot and phone are on the same 2.4 GHz Wi-Fi network.

Cleaning Modes & Scheduling

Multiple modes for customized cleaning.

Whole-House Clean: Default mode; cleans all mapped rooms.
Room Clean: Select specific rooms in the app to clean.
Spot Clean: Robot spirals outward from a 3-foot diameter spot.
Max Mode: Increases suction power for deep cleaning carpets.
Eco Mode: Quieter operation with extended battery life.
Schedule: Set it and forget it. Robot will run automatically.

WARNING! Always ensure the robot's path is clear of pet accidents, liquids, or large debris before starting.

Maintenance & Care

Regular maintenance ensures optimal performance.

Component	Frequency	Action
Robot Dustbin	After each run	Empty into trash.
Filter (Robot)	Every month	Tap to clean; rinse every 3 months (air dry 24 hrs).
Side Brushes	Every 2 weeks	Remove and clear wrapped hair/debris.
Main Brushroll	Every week	Remove, cut away wrapped hair/fibers.
Cliff Sensors & Camera	Weekly	Wipe with a dry cloth.
Charging Contacts	Monthly	Clean on robot and dock with dry cloth.
Wheels	Monthly	Remove debris.

CAUTION! Do not use robot or base with wet filters. Ensure all parts are completely dry before reassembly.

Self-Emptying Base

The base automatically empties the robot's dustbin after cleaning.

Operation: Robot docks after cleaning; base activates and empties contents into its sealed bag.
Bag Replacement: Indicator light on base turns red when bag is full. Replace with SharkBag™.
HEPA Filtration: Traps 99.7% of dust and allergens. Replace HEPA filter every 6-12 months.
Placement: Keep base in an open area with at least 3 feet clearance on each side and 5 feet in front.

WARNING! Only use genuine Shark replacement bags and filters. Do not attempt to wash or reuse bags.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that it does not cause harmful interference. ICES-003 Compliance: Class B digital apparatus. Copyright © SharkNinja Operating LLC. Shark, Shark AI ROBOT, Matrix Clean, and SharkClean are trademarks of SharkNinja. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/not docked	Place on charger; ensure power to base is on.
Robot is stuck	Obstacles/tangled brushes	Move robot to open area; clear brushes.
Poor navigation	Dirty sensors/bright light	Clean cliff sensors and camera lens; avoid direct sunlight on lens.
App connection lost	Wi-Fi issues	Restart robot and router; ensure 2.4 GHz network.
Base not emptying	Full bag/clog	Replace bag; check for clogs in robot dustbin port.
Error beeps/red light	Brush stuck/wheel issue	Check and clear main brushroll and all wheels.
Map not saving	Robot moved/interrupted	Do not move robot during initial mapping; run a full clean cycle.

Reset: Hold DOCK and SPOT buttons on robot for 10 seconds to reset Wi-Fi.

Service: 1-888-228-5531; sharkclean.com/support