Shark AI ROBOT RV2001 Vacuum Cleaner Manual

The Shark AI ROBOT RV2001 is an advanced robotic vacuum cleaner featuring AI Laser Navigation for precise home mapping, self-emptying base with HEPA filtration, multi-surface cleaning with brushroll, powerful suction, Wi-Fi connectivity for app control, voice command compatibility (Alexa/Google Assistant), scheduling, room-specific cleaning, and obstacle avoidance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, Filter, Remote Control, Power adapter.

Feature	Description
AI Laser Navigation	Creates accurate home map for efficient cleaning paths
Self-Empty Base	Automatically empties robot's dustbin into sealed bag
HEPA Filtration	Traps 99.9% of dust and allergens
Multi-Surface Brushroll	Cleans carpets and hard floors
Wi-Fi Connectivity	Enables app control and scheduling
Voice Control	Works with Alexa and Google Assistant
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual barriers to restrict cleaning areas
Dirt Detect	Focuses on dirtier areas with extra passes
Quiet Mode	Reduced noise for nighttime cleaning

Unpacking & Setup

Unpack and inspect all contents. Place base on level surface against wall.

Install side brushes: Snap onto bottom of robot.
Charge robot: Place on dock; ensure charging contacts align.
Install filter: Insert HEPA filter into robot's dustbin.
Power base: Plug into wall outlet.
Clear area: Remove obstacles, cords, and small objects from floor.

WARNING! Keep away from stairs and wet areas. Do not place base in direct sunlight.

First-Time Configuration

Power on robot; follow initial setup prompts.

Initial charge: Allow robot to charge fully (approx. 4 hours).
Map home: Press CLEAN to start first mapping run; robot will explore and map rooms.
Name rooms: Use SharkClean app to label rooms on map.
Set no-go zones: Use app to draw virtual boundaries.
Connect to Wi-Fi: Follow in-app instructions for network setup.

CAUTION! Ensure home is clear of pet waste and liquids before cleaning.

Specifications

Model: Shark AI ROBOT RV2001.
Navigation: AI Laser Vision with room mapping.
Suction Power: Adjustable (Eco, Normal, Max).
Dustbin Capacity: Robot: 0.5L; Base: 30-day capacity.
Battery: Lithium-ion, up to 90 minutes runtime.
Connectivity: 2.4GHz Wi-Fi, SharkClean app.
Voice Control: Amazon Alexa, Google Assistant.
Filter: HEPA filtration system.
Power Source: 100-240V AC, 50/60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Indicators

Robot Top: POWER, CLEAN, SPOT CLEAN, DOCK. Base: POWER indicator, Empty button.

Remote: CLEAN, DOCK, SPOT, ROOM SELECT, SCHEDULE, ECO/NORMAL/MAX.

LED Indicators: Blue (charging), Green (fully charged), Red (error/obstacle). App Controls: Start/stop cleaning, select rooms, set schedules, view cleaning history, adjust suction. Voice: "Alexa, ask Shark to start cleaning."

Connecting to Wi-Fi & App

Download SharkClean app from App Store or Google Play.

Enable robot's Wi-Fi: Press and hold DOCK + SPOT until Wi-Fi light flashes.
Open app: Follow prompts to connect to home network (2.4GHz only).
Name robot: Assign unique name for voice control.
Update firmware: App will check for and install updates.

Tip: Ensure robot is near router during setup. Restart router if connection fails.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

Start cleaning: Press CLEAN on robot or app.
Select mode: Whole Home (default), Room Clean (select rooms in app), Spot Clean (concentrated area).
Adjust suction: Eco (quiet), Normal (balanced), Max (deep clean).
Set schedule: App > Schedule > set days/times for automatic cleaning.
Pause/resume: Press CLEAN to pause; press again to resume.
Send to dock: Press DOCK or use voice command.
Recharge & Resume: Enabled in app; robot returns to dock if battery low, then finishes job.

WARNING! Do not pick up robot during cleaning; allow it to complete cycle.

Maintenance & Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty dustbin	After each cleaning	Remove and empty robot dustbin; replace.
Clean brushes	Weekly	Remove brushroll and side brushes; clear hair/debris.
Clean sensors	Monthly	Wipe laser window and cliff sensors with dry cloth.
Replace filter	Every 3 months	Remove old HEPA filter; insert new one.
Replace base bag	When full indicator lights	Open base compartment; remove and replace bag.

CAUTION! Unplug base before maintenance. Do not wash filter; tap to clean.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Wi-Fi module: FCC ID: 2ABZJ-SHARKRV2001.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dock contacts dirty	Clean robot and dock contacts with dry cloth; ensure proper alignment.
Robot stuck	Obstacles/tangled brushes	Move robot to open area; clear brushes of hair/debris.
Poor navigation	Dirty sensors/dark room	Clean laser window and sensors; ensure adequate lighting.
Wi-Fi disconnected	Network issues	Restart robot and router; reconnect via app.
Weak suction	Full dustbin/clogged filter	Empty dustbin; clean filter; check for blockages.
Error beeps	Wheel/brush obstruction	Inspect and clear all moving parts; restart robot.

Reset: Hold CLEAN + DOCK for 10 seconds to reset to factory settings.

Service: 1-800-798-7398; sharkclean.com/support