Shark AI ROBOT 2000 Series Vacuum Cleaner Manual

The Shark AI ROBOT 2000 Series is a smart robotic vacuum cleaner featuring AI-powered navigation, self-emptying base, multi-surface cleaning, Wi-Fi connectivity, voice control compatibility, and advanced obstacle detection. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unboxing & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Smart Home Integration 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging Dock, Remote Control, Side Brushes, Filter, Dust Bin.

Feature	Description
AI Navigation	Smart mapping and room recognition
Self-Empty Base	Automatically empties robot dust bin
Multi-Surface Cleaning	Carpet, hardwood, tile, and low-pile rugs
Wi-Fi Connectivity	Control via SharkClean app
Voice Control	Works with Alexa and Google Assistant
Obstacle Detection	Avoids cords, shoes, and other objects
Auto-Recharge	Returns to base when battery low
Spot Cleaning	Intensive clean for concentrated areas
Edge Cleaning	Special mode for corners and edges
HEPA Filter	Captures 99.97% of dust and allergens

Unboxing & Setup

Unpack and inspect all contents. Place base on level surface.

Install side brushes: Snap onto robot bottom.
Charge robot: Place on charging dock until battery full (approx. 4 hours).
Install filter: Insert HEPA filter into dust bin.
Connect base: Plug power adapter into outlet and self-empty base.
Clear area: Remove loose objects and cords from floor.

WARNING! Keep away from stairs and wet areas. Ensure charging contacts are clean.

First-Time Configuration

Power on robot; follow setup prompts.

Download app: Install SharkClean from App Store or Google Play.
Connect to Wi-Fi: Use app to connect robot to 2.4GHz network.
Create map: Let robot clean entire home to generate smart map.
Name rooms: Label rooms in app for targeted cleaning.
Set no-go zones: Mark areas to avoid in app.

CAUTION! Ensure robot is fully charged before first cleaning cycle.

Specifications

Model: Shark AI ROBOT 2000 Series
Battery: Lithium-ion, 90-minute runtime
Dust Bin Capacity: 0.5 liters (robot), 30 days (base)
Noise Level: 65 dB (Quiet Mode)
Connectivity: 2.4GHz Wi-Fi, Bluetooth
Compatibility: Alexa, Google Assistant, IFTTT
Filter: HEPA filtration system
Charging Time: 4 hours to full charge
Weight: 7.5 lbs (3.4 kg)
Power Source: 100-240V AC, 50/60Hz

Controls and Indicators

Robot Top: CLEAN button, SPOT button, DOCK button, Wi-Fi indicator. Base: Power indicator, Empty bin indicator.

Remote: CLEAN, DOCK, SPOT, ROOM SELECT, SCHEDULE, MAX mode.

App Controls: Start/Stop, Room selection, Cleaning modes (Quiet, Normal, Max), Scheduling, History, Notifications. Indicators: Blue (Wi-Fi connected), Green (Charging), Red (Error), Yellow (Low battery).

Smart Home Integration

Voice Control: "Alexa, ask Shark to start cleaning." "Hey Google, tell Shark to dock."

Enable skill: Search for Shark skill in Alexa/Google Home app.
Link account: Log in with SharkClean credentials.
Discover devices: Allow app to find robot.
Create routines: "Goodnight" routine to clean after bedtime.

Tip: Ensure robot and voice device are on same Wi-Fi network.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

Start cleaning: Press CLEAN button or use app.
Select mode: Quiet (low noise), Normal (balanced), Max (deep clean).
Room cleaning: Select specific rooms in app.
Spot cleaning: Press SPOT for 2-foot diameter intensive clean.
Schedule: Set daily/weekly cleaning in app.
Pause/resume: Press CLEAN to pause, press again to resume.
Return to dock: Press DOCK or use voice command.
Empty bin: Base automatically empties robot after cleaning.

WARNING! Do not pick up robot during cleaning cycle. Clear floor of small objects.

Maintenance & Care

Weekly: Empty dust bin, clean filter, check brushes. Monthly: Clean sensors, wipe charging contacts.

Empty bin: Remove and tap over trash can.
Clean filter: Tap gently, rinse under cold water (air dry 24 hours).
Remove hair: Cut tangled hair from brush roll.
Clean sensors: Wipe with dry cloth.
Replace parts: Side brushes every 6-12 months, filter every 9-12 months.

CAUTION! Unplug base before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/obstruction	Charge fully; clear debris from wheels and brushes.
Not connecting to Wi-Fi	Network issues	Ensure 2.4GHz network; restart router; reconnect in app.
Poor navigation	Dirty sensors	Clean cliff and bumper sensors with dry cloth.
Base not emptying	Full bag/clog	Replace bag in base; check for blockages in hose.
Error beeps/flashing red	Stuck brush/obstruction	Remove debris from brush roll; check for stuck objects.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; www.sharkclean.com/support