Shark 9626752422044 Vacuum Cleaner Manual

The Shark 9626752422044 is a versatile vacuum cleaner designed for powerful cleaning performance on various surfaces. It features multiple cleaning modes, a HEPA filtration system, detachable handheld unit, motorized brush roll, and specialized attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Operating Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with motor, Detachable handheld pod, Power cord, Motorized brush roll, Dust cup with HEPA filter, Cleaning attachments.

Feature	Description
Power/Surface Switch	Selects cleaning mode for carpets or hard floors
Detachable Handheld Pod	Converts to portable vacuum for above-floor cleaning
Motorized Brush Roll	Agitates and deep cleans carpets
HEPA Filtration System	Captures 99.9% of dust and allergens
Large Capacity Dust Cup	Easy-empty container for collected debris
Wand Release Button	Quickly detaches wand for handheld use
Power Cord Hook	Storage for power cord when not in use
Accessory Storage Caddy	Holds all cleaning attachments on vacuum
Headlight	Illuminates dark areas under furniture
Anti-Allergen Complete Seal	Traps dust and allergens inside vacuum

Assembly & Installation

Unpack and inspect all components. Assemble according to instructions.

Attach wand to vacuum body: Insert wand into socket until it clicks into place.
Connect floor nozzle: Align nozzle with wand and push until secure.
Install accessories: Place crevice tool, dusting brush, and upholstery tool in storage caddy.
Check filters: Ensure HEPA filter and pre-motor filter are properly installed.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Setup

Prepare vacuum for initial use.

Charge battery (if cordless model): Plug charger into outlet and connect to vacuum.
Check brush roll: Ensure it rotates freely and is free of obstructions.
Test suction: Turn on vacuum to verify proper operation.
Adjust settings: Set appropriate power level for your flooring type.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll while vacuum is operating.

Specifications

Model: Shark 9626752422044
Power Source: 120V AC, 60Hz (corded model)
Suction Power: Adjustable with multiple settings
Filtration: HEPA filter with Anti-Allergen Complete Seal
Dust Cup Capacity: 1.5 quarts
Cord Length: 25 feet
Weight: 15.2 lbs
Noise Level: ≤ 75 dB
Warranty: 5-year limited warranty
Operating Temp: 40°F to 104°F (4°C to 40°C)

Controls and Settings

Main controls located on vacuum body and handle.

Power Button: Turns vacuum on/off. Surface Switch: Selects between carpet and hard floor settings. Brush Roll Control: Turns brush roll on/off for delicate rugs. Suction Control: Adjusts suction power (if available). Wand Release Button: Detaches wand for handheld use. Dust Cup Release: Button to remove dust cup for emptying.

Settings: Carpet mode (activates brush roll), Hard floor mode (brush roll off), Bare floor setting (reduced suction), Upholstery tool setting.

Attachments & Accessories

Included accessories for specialized cleaning tasks.

Crevice Tool: Cleans tight spaces, corners, and between cushions.
Dusting Brush: Gentle cleaning for delicate surfaces, blinds, and lampshades.
Upholstery Tool: Cleans furniture, stairs, and car interiors.
Pet Power Brush: Motorized brush for removing pet hair from furniture.
Extension Wand: Extends reach for high ceilings and above-floor cleaning.

Tip: Store attachments on vacuum caddy for easy access during cleaning.

Operating Modes

Multiple cleaning configurations for different needs.

Upright Mode: Standard floor cleaning with motorized brush roll.
Handheld Mode: Detach pod for portable cleaning of furniture, stairs, cars.
Above-Floor Cleaning: Use wand and attachments for ceilings, walls, drapes.
Hard Floor Setting: Brush roll off for delicate hard surfaces.
Carpet Setting: Full power with brush roll agitation.

WARNING! Do not use vacuum to pick up liquids, burning materials, or sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove and empty when full.
Clean filters: Remove and tap HEPA filter monthly; wash pre-motor filter every 3 months.
Clear brush roll: Remove hair and debris wrapped around brush roll regularly.
Check for blockages: Inspect hose, wand, and nozzle for obstructions.
Store properly: Wrap cord around hooks, store in dry location.

CAUTION! Unplug vacuum before performing any maintenance. Allow filters to dry completely before reinstalling.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is protected by U.S. and international patents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check for blockages in hose, wand, or nozzle.
Brush roll not spinning	Obstruction or belt issue	Clear debris from brush roll; check belt for wear or damage.
Vacuum won't turn on	Power connection	Check power cord connection; ensure outlet is working; check circuit breaker.
Overheating	Clogged filter or blockage	Clean filters; remove any obstructions; allow vacuum to cool for 60 minutes.
Unusual noise	Foreign object in brush roll or motor	Turn off immediately; inspect brush roll and air path for objects.
HEPA filter light on	Filter needs cleaning	Remove and clean HEPA filter according to instructions.

Reset: Unplug vacuum for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com