Shark 7.2 VDC Vacuum Cleaner Manual

The Shark 7.2 VDC Vacuum Cleaner is a powerful, cordless stick vacuum designed for versatile home cleaning. It features a 7.2V lithium-ion battery, lightweight design, motorized brush roll for carpets and hard floors, multiple attachments (crevice tool, dusting brush, upholstery tool), a washable filter, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motorized brush roll, Handle with power trigger, Removable battery pack, Dust cup with filter, Charging dock, Attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks.
2. Install battery: Slide battery pack into slot on handle until secure.
3. Attach floor nozzle: Connect motorized nozzle to the main body.
4. Mount charging dock: Use screws (included) to mount dock on wall near outlet.
5. Plug charger into dock and outlet.

WARNING! Ensure vacuum is turned off and battery is not inserted during assembly to prevent accidental start-up.

First-Time Use

Fully charge battery before first use (approx. 4 hours).

1. Place vacuum on charging dock; LED indicator will glow red while charging, green when fully charged.
2. Press power trigger to start suction; motorized brush roll will engage automatically.
3. For attachments: Detach floor nozzle and connect desired tool directly to hose.
4. Empty dust cup after each use to maintain suction.

CAUTION! Do not use on wet surfaces or to pick up liquids, flammable materials, or sharp objects.

Specifications

• Model: Shark 7.2 VDC.
• Power Source: 7.2V Lithium-ion rechargeable battery.
• Runtime: Up to 25 minutes (ECO mode), 15 minutes (MAX mode).
• Charge Time: Approximately 4 hours.
• Dust Cup Capacity: 0.5 liters.
• Weight: 5.5 lbs (2.5 kg).
• Noise Level: ≤75 dB.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Filter: Washable foam and felt filter.
• Warranty: 1-year limited warranty.

Controls and Settings

Power Trigger: Hold to run; release to stop. Mode Button: Toggle between ECO (standard suction) and MAX (boost suction) modes. Brush Roll On/Off: Switch on handle disengages brush roll for hard floors or delicate rugs. Battery Indicator: LED on handle shows charge level (green=high, amber=medium, red=low).

Charging Dock: LED indicates charging status (red=charging, green=fully charged, off=no power).

Using Attachments

Detach floor nozzle to use tools for above-floor cleaning.

1. Turn off vacuum and remove from power source.
2. Press release button to detach floor nozzle.
3. Connect desired attachment directly to hose end.
4. Turn on vacuum and clean targeted area.
5. Switch back to floor nozzle for regular cleaning.

Tip: Use dusting brush for electronics and upholstery tool for fabric surfaces to avoid damage.

Cleaning Modes

Two suction modes for different cleaning needs.

1. ECO Mode: Standard suction for everyday cleaning; maximizes battery runtime.
2. MAX Mode: Boosted suction for deep cleaning carpets or picking up heavy debris; reduces runtime.
3. Brush Roll On: For carpets and rugs; agitates and lifts embedded dirt.
4. Brush Roll Off: For hard floors (wood, tile) or delicate area rugs to prevent scattering debris.

WARNING! Do not run vacuum continuously in MAX mode for extended periods to prevent overheating.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use: Press release button, remove cup, and empty into trash.
2. Clean filter monthly: Remove filter, rinse under cold water, and air dry completely for 24 hours before reinserting.
3. Clear brush roll tangles: Turn off vacuum, remove nozzle, and cut away hair/threads wrapped around brush roll.
4. Wipe exterior with dry cloth; do not use chemicals or immerse in water.

CAUTION! Never use vacuum without filter; ensure filter is completely dry before reinstallation to prevent motor damage.

Battery & Charging

Use only provided charger and battery.

• Charge fully before first use and after long storage.
• Store vacuum on charging dock when not in use to maintain battery charge.
• Battery life: Approximately 300 charge cycles under normal use.
• If battery no longer holds charge, contact Shark customer service for replacement.
• Do not expose battery to extreme temperatures or fire.

WARNING! Do not attempt to disassemble or replace battery yourself; risk of fire or injury.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

Reset: Remove battery for 10 seconds, reinsert, and place on charger.

Service: 1-800-798-7398; www.sharkclean.com