Shark 622356314381 Vacuum Cleaner Manual

The Shark 622356314381 is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister mode for portable cleaning, a HEPA filter system for allergen capture, a motorized brushroll for deep carpet cleaning, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, motorized brushroll, HEPA filter, crevice tool, dusting brush, upholstery tool, wand, and power cord.

Feature	Description
Lift-Away Mode	Detachable canister for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
HEPA Filtration System	Captures 99.9% of dust and allergens
Suction Control	Adjustable for different floor types
Wand Release Button	Quickly detaches wand for extended reach
Dust Cup Release	Easy-empty, bagless dust cup
Power Switch	Turns vacuum on/off
Cord Wrap	Integrated cord storage hooks
Brushroll On/Off	Switch to turn brushroll on for carpets or off for hard floors
Attachment Holder	Stores tools on vacuum body

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat, stable surface.

Attach the wand: Insert wand into upright body until it clicks.
Attach the hose: Connect hose to wand and canister ports.
Install the HEPA filter: Place filter into filter compartment at back of dust cup.
Attach floor nozzle: Slide nozzle onto wand until it locks.
Store attachments: Place crevice tool, dusting brush, and upholstery tool in holder.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug into a standard 120V AC outlet; turn on power switch.

Select floor setting: Use suction control dial for carpets (high) or hard floors (low).
Engage brushroll: Turn brushroll on for carpets; turn off for hard floors or area rugs.
Begin vacuuming: Push vacuum forward and back in overlapping strokes.
Use Lift-Away mode: Press release button to detach canister for stairs or furniture.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet spills.

Specifications

Model: Shark 622356314381.
Type: Upright vacuum with Lift-Away canister.
Filtration: HEPA filter captures 99.9% of dust and allergens.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool, wand.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, suction control dial, brushroll on/off switch. Body: Wand release, hose release, dust cup release, attachment holder.

Settings: Suction control (High for carpets, Low for hard floors). Brushroll (On for carpets, Off for hard floors/delicate rugs). Lift-Away mode: Detach canister for portable cleaning.

Using Attachments

Attach tools to wand or hose for above-floor cleaning.

Detach wand: Press wand release button and pull wand out.
Attach tool: Insert crevice tool, dusting brush, or upholstery tool into wand end.
Clean: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.
Return attachments: Store in holder on vacuum body when not in use.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Two main modes: Upright and Lift-Away.

Upright mode: For large carpeted or hard floor areas. Use suction control and brushroll as needed.
Lift-Away mode: Press release button to detach canister. Carry canister to clean stairs, furniture, or under low-clearance areas.
Above-floor cleaning: Use wand and attachments for ceilings, curtains, and blinds.

WARNING! Do not use Lift-Away mode to vacuum water or liquids. Keep canister upright to prevent debris from entering hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is full.
Clean filter: Remove HEPA filter every month; tap gently or rinse (allow 24 hours to dry completely).
Clear brushroll: Turn off and unplug; use scissors to cut away wrapped hair or fibers.
Check for clogs: If suction is weak, check hose, wand, and nozzle for blockages.
Inspect cord: Ensure cord is not damaged; wrap on cord hooks when storing.

CAUTION! Always unplug vacuum before maintenance. Do not operate with wet filter.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power outlet/cord	Check outlet; ensure cord is plugged in securely; check power switch.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages; clean filter.
Brushroll not spinning	Obstruction/switch	Turn off and unplug; clear hair or debris from brushroll; ensure brushroll switch is on.
Vacuum is overheating	Clog/filter	Turn off and unplug; let cool; check for clogs; clean filter.
Unusual noise	Debris in fan/hose	Turn off and unplug; inspect for foreign objects in hose or brushroll chamber.

Reset: Unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com