Shark 622356298346 Vacuum Cleaner Manual

The Shark 622356298346 is a versatile upright vacuum cleaner featuring powerful suction, a lift-away canister design, advanced swivel steering, HEPA filtration, multiple brushroll settings for carpets and hard floors, a large dust cup capacity, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, Swivel steering head, Brushroll with on/off control, HEPA filter, Dust cup with empty button, Hose and wand, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks into place.
2. Install hose: Connect hose to the front of the vacuum body.
3. Attach wand: Insert wand into hose connector.
4. Connect power cord: Wrap cord around rear hooks for storage.
5. Install filter: Place HEPA filter into the filter compartment.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; select appropriate settings.

1. Select floor setting: Turn dial to match your floor type (hard floor, low-pile, high-pile carpet).
2. Adjust brushroll: Press brushroll button to ON for carpets, OFF for hard floors.
3. Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
4. Empty dust cup: Press empty button when cup is full; dispose of debris.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark 622356298346.
• Type: Upright with Lift-Away canister.
• Filtration: HEPA filter system.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Brushroll: Anti-allergen seal, on/off control.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Suction control slider. Body: Brushroll on/off button, Floor setting dial, Lift-Away release button, Wand release button.

Settings: Floor dial (Hard Floor, Low-Pile Carpet, High-Pile Carpet). Suction control (Low, Medium, High). Brushroll (On for carpets, Off for hard floors).

Using Attachments

For above-floor cleaning: detach canister and connect tools.

1. Press Lift-Away button to detach canister from upright body.
2. Select attachment: Connect crevice tool, upholstery tool, or dusting brush to wand.
3. Clean: Use tool on stairs, furniture, blinds, or tight spaces.
4. Reattach: Click canister back into upright body after use.

Tip: Ensure attachments are securely clicked into place before use.

Cleaning Modes

Upright mode: For large floor areas. Lift-Away mode: For stairs, furniture, under furniture.

1. Upright: Use on floors with brushroll on for carpets, off for hard floors.
2. Lift-Away: Detach canister, use wand and attachments for above-floor cleaning.
3. Under furniture: Use hose and wand to reach under low-clearance furniture.
4. High-reach: Use extended wand for ceilings and corners.

WARNING! Do not vacuum wet spills, large objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press empty button; dispose of debris after each use.
2. Clean filter: Remove and tap HEPA filter monthly; rinse if washable (air dry completely).
3. Clear brushroll: Remove hair and threads from brushroll regularly.
4. Check hose and wand: Remove clogs if suction decreases.
5. Inspect power cord: Do not use if damaged.

CAUTION! Unplug vacuum before performing any maintenance.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com