Shark 622356287616 Vacuum Cleaner Manual

The Shark 622356287616 is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brushroll, advanced swivel steering, a large-capacity dust cup, HEPA filtration, and various attachments for above-floor cleaning. It is designed for cleaning carpets, hard floors, and upholstery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Swivel steering handle, Dust cup with empty mechanism, HEPA filter, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Install hose: Connect hose to vacuum port; ensure tight fit.
3. Attach wand: Insert wand into handle; twist to lock.
4. Attach floor nozzle: Click floor nozzle onto wand until secure.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure HEPA and pre-motor filters are installed.
2. Empty dust cup: Press release button to remove and empty cup.
3. Select surface setting: Use brushroll switch for carpet or hard floor.
4. Test attachments: Connect crevice tool or dusting brush to wand.
5. Begin cleaning: Plug in, turn on power switch, and push forward.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark 622356287616.
• Type: Upright vacuum with handheld conversion.
• Suction Power: High-performance motor with adjustable settings.
• Filtration: HEPA filter with anti-allergen seal.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Brushroll on/off button, Handle release. Body: Dust cup release, Cord wrap, Hose port.

Settings: Brushroll on (carpets), Brushroll off (hard floors/delicate rugs). Suction power: Standard (default), Boost (for deep cleaning). Handle positions: Upright, handheld, above-floor.

Maintenance indicators: Filter check light (if equipped).

Using Attachments

For above-floor cleaning: detach wand and connect tools.

1. Turn off and unplug vacuum.
2. Press handle release to detach from floor nozzle.
3. Select attachment: Crevice tool (tight spaces), Upholstery tool (furniture), Dusting brush (surfaces).
4. Connect to wand or hose end.
5. Plug in, turn on, and clean.

Tip: Use upholstery tool with brushroll off for delicate fabrics.

Cleaning Modes

Supports multiple cleaning configurations.

1. Upright mode: For floor cleaning; push forward and back.
2. Handheld mode: Press release, lift handle; use for stairs, cars.
3. Above-floor mode: Use wand with attachments for ceilings, furniture.
4. Carpet mode: Brushroll on for deep carpet cleaning.
5. Hard floor mode: Brushroll off to prevent scattering debris.

WARNING! Do not use on wet surfaces. Avoid vacuuming sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use; press empty button over trash.
2. Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hrs.
3. Clear brushroll: Remove hair and debris; cut with scissors if needed.
4. Check blockages: Inspect hose, wand, and nozzle for clogs.
5. Store properly: Wrap cord, store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see manual for details.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com