Shark 622356250696 Vacuum Cleaner Manual

The Shark 622356250696 is a versatile vacuum cleaner designed for powerful cleaning on various surfaces. It features advanced suction technology, multiple attachments for different cleaning tasks, a large-capacity dust cup, washable filters, and a lightweight, maneuverable design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Motorized brush roll, Large-capacity dust cup, Washable foam and felt filters, Crevice tool, Upholstery tool, Dusting brush, Power cord, On/off switch.

Feature	Description
Motorized brush roll	For deep cleaning carpets and agitating embedded dirt
Large-capacity dust cup	Easy-to-empty container for collected debris
Washable foam and felt filters	Maintains suction power; reusable for cost savings
Crevice tool	For tight spaces, corners, and along edges
Upholstery tool	Gentle cleaning for furniture, curtains, and stairs
Dusting brush	Soft bristles for delicate surfaces like blinds and shelves
Power cord	Long reach for extended cleaning without frequent unplugging
On/off switch	Controls power to the vacuum motor
Adjustable handle	For comfortable use at different heights
Lightweight design	Easy to carry and maneuver around furniture

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into main body until it clicks securely.
Install dust cup: Align dust cup with slots on body and push until locked.
Attach hose: Connect hose to port on vacuum body; ensure tight fit.
Connect desired attachment: Press attachment onto end of hose or wand.
Plug into standard electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Check all connections are secure to prevent air leaks.

First-Time Use

Before cleaning, perform initial setup and filter check.

Check filters: Ensure foam and felt filters are properly installed in dust cup.
Select surface setting: For carpets, ensure brush roll is engaged; for hard floors, lift handle to retract brush roll if applicable.
Power on: Press on/off switch; begin cleaning in open area to test suction.
Empty dust cup: After first use, empty cup to gauge capacity.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

Model: Shark 622356250696.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Filtration: Washable foam and felt filter system.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: 12 lbs.
Warranty: Limited 5-year warranty (see manual for details).
Operating Temp: 40°F to 100°F.

Controls and Settings

Primary control: On/off switch located on body. Nozzle settings: Adjust for carpet or hard floor via handle position or switch (if equipped).

Brush Roll Control: Manual on/off or automatic based on surface detection in some models. Suction Control: Fixed high suction; no adjustable settings.

Maintenance indicators: Check filter light (if equipped) alerts when filters need cleaning. Cord rewind: Manual wrap around hooks; no automatic rewind.

Using Attachments

Attachments enhance cleaning for specific tasks.

Turn off and unplug vacuum before changing attachments.
Crevice tool: For baseboards, between cushions, car interiors.
Upholstery tool: Use on sofas, chairs, curtains; gentle on fabrics.
Dusting brush: For lampshades, blinds, bookshelves, electronics.
To use: Press attachment onto hose end until click; select appropriate suction setting if available.

Tip: Clear attachment openings if debris blocks suction during use.

Cleaning Modes

Designed for carpets, hard floors, and above-floor cleaning.

Carpet mode: Brush roll agitates fibers; use slow, overlapping passes.
Hard floor mode: Retract or turn off brush roll to prevent scattering debris.
Above-floor mode: Use hose with attachments for furniture, stairs, ceilings.
High-pile carpet setting: Adjust handle to raise nozzle if carpet is thick.
Edge cleaning: Use side of nozzle or crevice tool along walls.

WARNING! Do not run vacuum over power cord. Avoid vacuuming area rugs with tassels that may tangle in brush roll.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: When cup is 2/3 full; press release button to remove.
Clean filters: Rinse foam and felt filters under lukewarm water monthly; air dry 24 hours before reinstalling.
Clear brush roll: Remove tangled hair, strings, or fibers; use scissors if needed.
Inspect hose and attachments: Remove clogs with long object; check for cracks.
Store properly: Wrap cord around hooks; store in dry area.

CAUTION! Unplug before maintenance. Do not use damaged filters or components.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see manual for terms.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; clean filters; check hose and attachments for blockages.
Brush roll not spinning	Tangled debris, worn belt	Clear brush roll of obstructions; inspect and replace belt if damaged.
Vacuum won't turn on	Power source, switch, cord	Check outlet; ensure plug is secure; inspect cord for damage.
Overheating	Clogged filters, full dust cup	Clean filters; empty dust cup; let vacuum cool 30 minutes.
Unusual noise	Foreign object in hose or brush roll	Turn off, unplug, and inspect for obstructions; remove object.

Reset: Unplug for 30 minutes if motor overheats; restart.

Service: 1-800-798-7398; sharkclean.com