Shark 622356238779 Vacuum Cleaner Manual

The Shark 622356238779 is a versatile upright vacuum cleaner designed for deep carpet cleaning and above-floor applications. It features a powerful motor, advanced swivel steering, a lift-away pod for portable cleaning, a HEPA filter, multiple brush rolls for different surfaces, and various attachments for comprehensive home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized floor nozzle, HEPA filtration system, Hose and wand assembly, Various cleaning attachments.

Assembly & Installation

Unpack all components and inspect for damage. Assemble on a clean, flat surface.

1. Attach the handle: Insert the handle into the main body until it clicks into place.
2. Install the hose: Connect the hose to the designated port on the vacuum body.
3. Attach the wand: Insert the wand into the hose connector until secure.
4. Install attachments: Store attachments on the provided caddy or on the vacuum itself.
5. Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts during assembly.

First-Time Setup

Before first use, perform these setup steps.

1. Check filter: Ensure HEPA filter is properly installed in the filter compartment.
2. Adjust height: Set the floor nozzle to the appropriate height for your flooring.
3. Test suction: Turn on the vacuum to ensure proper operation.
4. Familiarize with controls: Locate the power switch, brush roll on/off, and release buttons.
5. Charge if cordless: If model includes battery, charge fully before first use.

CAUTION! Do not use without filters installed. Ensure cord is fully unwound from storage.

Specifications

• Model: Shark 622356238779
• Type: Upright vacuum with Lift-Away technology
• Power Source: 120V AC, 60Hz (corded)
• Cord Length: 25 feet
• Dust Cup Capacity: 1.2 dry quarts
• Filtration: HEPA filter with anti-allergen complete seal
• Brush Roll: Motorized, self-cleaning
• Weight: 14.5 lbs
• Warranty: 5-year limited warranty
• Noise Level: ≤ 75 dB

Controls and Settings

Main controls located on the handle and body of the vacuum.

Handle Controls: Power switch, Brush roll on/off button, Suction control slider.

Body Controls: Lift-Away release button, Dust cup release button, Hose release lever.

Settings: Height adjustment (multiple settings for different carpets), Suction power (High/Low for different surfaces), Brush roll on/off (for delicate rugs or hard floors).

Using Attachments

Various attachments for specialized cleaning tasks.

1. Crevice Tool: For tight spaces, corners, and along edges.
2. Dusting Brush: For delicate surfaces, blinds, and lampshades.
3. Upholstery Tool: For sofas, chairs, and car interiors.
4. Pet Hair Tool: Specifically designed to remove pet hair from fabrics.
5. Under-Appliance Wand: For cleaning under refrigerators and stoves.

Tip: Attach tools to the wand end for extended reach. Ensure connections are secure before use.

Cleaning Modes

Three main cleaning modes for different needs.

1. Upright Mode: For whole-floor cleaning with motorized brush roll engaged.
2. Lift-Away Mode: Detach the pod for portable cleaning of stairs, furniture, and above-floor areas.
3. Handheld Mode: Use with attachments for spot cleaning and detailed work.

WARNING! Always turn off the vacuum before switching between modes. Do not force connections.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup: Empty after each use or when full indicator appears.
2. Clean filters: Rinse HEPA filter every 3 months (air dry completely for 24 hours before reinstalling).
3. Clear brush roll: Remove hair and debris from brush roll regularly.
4. Check for blockages: Inspect hose, wand, and nozzles for obstructions.
5. Store properly: Wind cord around cord hooks, store in dry location.

CAUTION! Unplug before performing any maintenance. Never use wet filters.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright © SharkNinja Operating LLC. Shark is a registered trademark of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes if unit overheats or malfunctions.

Service: 1-800-798-7398; sharkclean.com