Shark 4403939053084 Vacuum Cleaner Manual

The Shark 4403939053084 is a versatile upright vacuum cleaner designed for deep carpet cleaning and hard floor surfaces. It features a powerful motor, advanced swivel steering, a lift-away pod for portable cleaning, a HEPA filter system, multiple attachments for above-floor cleaning, and a large dust cup capacity. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized brushroll, HEPA filter, Dust cup with empty button, Hose and wand, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into upright body until it clicks securely.
2. Connect hose: Attach hose to the front of the vacuum pod.
3. Install wand: Insert wand into hose end until it locks.
4. Attach floor nozzle: Connect floor nozzle to the bottom of the upright body.
5. Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before operation. Keep fingers away from moving parts.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure HEPA filter and pre-motor filter are properly installed.
2. Adjust height: Set floor selector to appropriate setting (carpet/hard floor).
3. Test attachments: Connect crevice tool, upholstery tool to wand.
4. Power on: Press power switch; verify suction and brushroll operation.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark 4403939053084.
• Type: Upright vacuum with Lift-Away.
• Motor: High-efficiency, powerful suction.
• Filtration: HEPA filter with anti-allergen seal.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brushroll on/off button, Hose release button.

Settings: Floor selector (carpet/hard floor), Suction control (if applicable), Cord release button. Use brushroll control to turn off brushroll for delicate rugs or hard floors. Lift-Away release button detaches pod for portable cleaning.

Using Attachments

For above-floor cleaning: detach Lift-Away pod or use hose directly.

1. Detach pod: Press release button, lift pod away from floor nozzle.
2. Connect tool: Attach crevice, upholstery, or dusting brush to wand end.
3. Clean: Use suction for tight spaces, furniture, shelves, etc.
4. Reattach: Return pod to upright body until it clicks.

Tip: Ensure hose is fully extended and attachments are securely connected.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press empty button; dispose of debris.
2. Clean filters: Rinse HEPA filter and pre-motor filter monthly (air dry 24 hrs).
3. Clear brushroll: Remove hair and threads from brushroll regularly.
4. Check blockages: Inspect hose, wand, and nozzle for obstructions.

WARNING! Unplug vacuum before maintenance. Do not use damaged filters.

Storage & Care

Store in a dry, cool place. Wrap cord around cord hooks. Empty dust cup after each use.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com