Shark 4403931112860 Vacuum Cleaner Manual

The Shark 4403931112860 is a versatile upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a powerful motor, advanced swivel steering for easy maneuverability, a lift-away pod for portable cleaning above floors, a HEPA filter to trap dust and allergens, multiple brush rolls for different surfaces, and various attachments for detailed cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Maintenance & Cleaning 8. Storage & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized floor nozzle, HEPA filter system, Hose and wand, On-board accessory storage.

Feature	Description
Powerful Suction Motor	Provides deep cleaning on carpets and hard floors
Swivel Steering	Allows for easy maneuverability around furniture
Lift-Away Pod	Detachable canister for portable cleaning above floors
HEPA Filter	Traps 99.9% of dust and allergens
Motorized Floor Nozzle	Automatic brush roll adjustment for carpets/hard floors
On-Board Accessory Storage	Holds crevice tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum cleaner on/off
Cord Wrap	Integrated cord storage hooks
Dust Cup Release	Button to empty dust cup easily
Handle Controls	Buttons for power, brush roll on/off, and suction settings

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Align handle with upright body and secure with provided screws.
Connect the hose: Insert hose end into the designated port on the vacuum body until it clicks.
Attach the wand: Insert wand into the hose grip until secure.
Install the floor nozzle: Align nozzle with the base and push until it locks into place.
Mount accessories: Place crevice tool, dusting brush, and upholstery tool in on-board storage clips.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug into a standard 120V AC outlet; turn on power switch.

Select surface setting: Use brush roll switch for carpets (ON) or hard floors (OFF).
Adjust suction: Use power setting button for high/low suction as needed.
Begin vacuuming: Push vacuum forward and back in slow, overlapping strokes.
Use Lift-Away mode: Press release button to detach pod for stairs or above-floor cleaning.
Empty dust cup: Press release button to remove and empty cup when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Model: Shark 4403931112860.
Type: Upright vacuum with Lift-Away pod.
Motor: High-efficiency, powerful suction.
Filtration: HEPA filter system.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments Included: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: 15 lbs.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brush roll on/off button, Suction setting button (High/Low).

Body: Lift-Away release button, Dust cup release button, Hose release lever.

Settings: Brush roll ON for carpets (agitates fibers); OFF for hard floors (suction only). Suction HIGH for deep cleaning; LOW for delicate rugs or to prevent scatter. Lift-Away mode detaches pod for portable cleaning. Accessory selection: Choose appropriate tool for task (crevice, dusting, upholstery).

Using Attachments

Attachments stored on-board; connect to wand or hose end.

Detach wand: Press release button on hose grip to remove wand.
Select attachment: Choose crevice tool for tight spaces, dusting brush for surfaces, upholstery tool for furniture.
Connect: Insert attachment into wand or hose end until secure.
Use: Turn on vacuum and guide attachment over area to be cleaned.
Return: Store attachments in on-board clips after use.

Tip: Ensure vacuum is turned off when changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button, remove cup, empty contents into trash.
Clean filter: Remove HEPA filter every 3 months; tap gently to remove dust; do not wash.
Check brush roll: Turn off and unplug; remove floor nozzle to clear hair or debris from brush roll.
Inspect hose and wand: Remove blockages if suction decreases.
Wipe exterior: Use dry cloth to clean vacuum body.

WARNING! Always unplug vacuum before performing maintenance. Do not use water on electrical parts.

Storage & Care

Store in a cool, dry place. Wrap cord around cord wrap hooks. Ensure dust cup is empty before storage.

CAUTION! Do not store vacuum with wet or damp components. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is ON.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages; clean filter.
Brush roll not spinning	Debris/switch setting	Turn off and unplug; clear hair/debris from brush roll; ensure brush roll switch is ON for carpets.
Vacuum is difficult to push	Height setting/brush roll	Adjust height setting if available; ensure brush roll is free of obstructions.
Unusual noise	Foreign object	Turn off and unplug; inspect hose, wand, and nozzle for foreign objects; remove if found.

Reset: Unplug vacuum for 10 minutes, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com