Shark 4402193998098 Vacuum Cleaner Manual

The Shark 4402193998098 is a versatile upright vacuum cleaner designed for deep carpet cleaning and multi-surface use. It features advanced swivel steering, a lift-away pod for portable cleaning above floors, a HEPA filter system, multiple brush rolls for pet hair and debris, various attachments, and a large-capacity dust cup. Powered by a standard 120V AC outlet. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Swivel steering handle, Lift-Away pod, HEPA filter, Dust cup, Brush roll (anti-hair wrap), Crevice tool, Upholstery tool, Dusting brush, Power cord.

FeatureDescription
Swivel SteeringFor easy maneuverability around furniture and obstacles
Lift-Away PodDetachable for portable cleaning of stairs, furniture, and above floors
HEPA FiltrationTraps 99.9% of dust and allergens
Anti-Hair Wrap Brush RollPrevents hair tangles for pet owners
Large Dust CupEasy-empty, bagless design
AttachmentsCrevice tool, upholstery tool, dusting brush included
Power SwitchTurns vacuum on/off
Brush Roll SwitchActivates/deactivates brush roll for hard floors
Cord WrapIntegrated hooks for storing power cord
Handle ReleaseButton to detach lift-away pod

Assembly & Installation

Unpack and inspect all parts. Assemble on a flat, stable surface.

  1. Attach handle: Insert handle into main body until it clicks securely.
  2. Install dust cup: Align and push into place until it locks.
  3. Attach hose: Connect hose to lift-away pod and main body ports.
  4. Install filter: Place HEPA filter into filter compartment.
  5. Attach tools: Store crevice tool, upholstery tool, and dusting brush on provided caddy or handle clips.
  6. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Setup

Before first use, perform initial setup and check.

  1. Check filter: Ensure HEPA filter is properly seated and clean.
  2. Empty dust cup: Confirm dust cup is empty and securely attached.
  3. Test brush roll: Turn on vacuum and verify brush roll spins freely.
  4. Adjust height: For carpets, set floor selector to appropriate height (if applicable).
  5. Familiarize with controls: Locate power switch, brush roll switch, and handle release.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brush roll on/off button, Handle release button for lift-away mode.

Body: Floor selector (for adjustable models), Dust cup release button, Hose release latch.

Operation Modes: Upright mode for floors, Lift-Away mode for stairs/upholstery, Bare floor setting (brush roll off). Settings: Suction power (single speed on base model), Brush roll activation, Cord rewind (manual).

Using Attachments

Attach tools to hose for above-floor cleaning.

  1. Detach lift-away pod: Press handle release button and lift pod away.
  2. Select tool: Choose crevice, upholstery, or dusting brush.
  3. Connect: Insert tool end into hose until it clicks.
  4. Clean: Use tool on stairs, furniture, blinds, corners, etc.
  5. Return to upright: Reattach pod by aligning and pressing down until it clicks.

Tip: For best suction, ensure hose and tool connections are secure and free of blockages.

Cleaning Modes

Supports multiple cleaning configurations.

  1. Upright Floor Cleaning: Use on carpets and rugs with brush roll on.
  2. Bare Floor Cleaning: Turn brush roll off to avoid scattering debris.
  3. Lift-Away Mode: Detach pod for portable cleaning of stairs, under furniture, ceilings.
  4. Above-Flow Cleaning: Use hose with attachments for furniture, drapes, auto interiors.
  5. Spot Cleaning: Use hose and crevice tool for concentrated areas.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: When dust reaches MAX line, press release button and empty into trash.
  2. Clean filter: Remove HEPA filter every 3 months (or as needed) and tap clean. Do not wash HEPA filter unless specified.
  3. Wash foam filter: Rinse under water, air dry completely before reinstalling.
  4. Clear brush roll: Cut away wrapped hair/debris with scissors (unplug first).
  5. Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
  6. Store properly: Wrap cord, store attachments on caddy, keep in dry place.

CAUTION! Always unplug vacuum before performing any maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck if plugged in; test outlet; check circuit breaker.
Loss of suctionFull dust cup/blockageEmpty dust cup; check hose, wand, and nozzle for clogs; clean filter.
Brush roll not spinningObstruction/switchUnplug and remove debris from brush roll; ensure brush roll switch is ON.
Vacuum is overheatingBlockage/filterUnplug, let cool, check for blockages; clean or replace filter.
Lift-Away pod not detachingRelease button/latchPress handle release firmly; check for obstructions in latch mechanism.

Reset: Unplug for 60 minutes to reset thermal protector if overheated.

Service: 1-800-798-7398; www.sharkclean.com

Shark 4402193998098 Vacuum Cleaner Manual © - All Rights Reserved 2025