Shark 3DCOMPLETE VM200 Vacuum Cleaner Manual

The Shark 3DCOMPLETE VM200 is a versatile upright vacuum cleaner featuring 3D Complete technology for deep carpet cleaning and hard floor pickup, a Lift-Away pod for portable above-floor cleaning, a sealed HEPA filtration system, an Anti-Allergen Complete seal, a powered brushroll with on/off control, multiple cleaning modes, and various attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with Lift-Away pod, Powered brushroll, HEPA filter, Dust cup, Hose, Wand, and various attachments.

Assembly & Setup

Unpack and inspect contents. Assemble before first use.

1. Attach wand: Insert wand into upright body until it clicks.
2. Connect hose: Attach hose to wand and pod connection points.
3. Install filters: Place HEPA filter and pre-motor filter as indicated.
4. Attach floor nozzle: Connect nozzle to the bottom of the upright body.
5. Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure HEPA and pre-motor filters are properly seated.
2. Empty dust cup: Ensure it is empty before use.
3. Select surface setting: Set brushroll ON for carpets, OFF for hard floors.
4. Power on: Plug in, then press power switch.
5. Test attachments: Ensure hose and wand connections are secure.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

• Model: Shark 3DCOMPLETE VM200.
• Technology: 3D Complete with Auto-Adjust.
• Filtration: Sealed HEPA with Anti-Allergen Complete seal.
• Brushroll: Powered, with on/off control.
• Dust Cup Capacity: 1.5 dry quarts.
• Cleaning Modes: Upright, Lift-Away, handheld.
• Attachments: Crevice tool, dusting brush, pet upholstery tool.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, Brushroll on/off button.

Body: Lift-Away release button, Dust cup release, Hose release.

Settings: Brushroll ON for carpets (deep cleaning); Brushroll OFF for hard floors (suction only). Lift-Away mode: Detach pod for above-floor cleaning. Handheld mode: Use hose with attachments for detailed cleaning.

Using Attachments

Attachments stored on wand or body. For above-floor cleaning.

1. Detach pod: Press Lift-Away release button.
2. Select attachment: Crevice tool for tight spaces; dusting brush for surfaces; pet tool for hair.
3. Connect: Insert attachment into end of hose or wand.
4. Clean: Use powered suction for debris removal.

Tip: Ensure vacuum is on and brushroll is OFF when using attachments.

Cleaning Modes

Three primary modes: Upright, Lift-Away, Handheld.

1. Upright mode: For floor cleaning. Adjust handle height; push forward/backward.
2. Lift-Away mode: Press release button; detach pod for stairs, furniture, under tables.
3. Handheld mode: Remove wand; use hose with attachments for spot cleaning.
4. Brushroll control: ON for carpets; OFF for hard floors/delicate rugs.

WARNING! Do not vacuum large, hard objects (coins, paper clips) to avoid damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full. Clean filters: Rinse HEPA and pre-motor filters monthly (air dry 24 hrs). Check brushroll: Remove debris/hair regularly. Inspect hose/wand: Clear clogs if suction reduces. Store properly: Wrap cord; store in dry area.

CAUTION! Unplug before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com