Shark 250 Series IC205 Series UF280 Series Vacuum Cleaner Manual

The Shark 250 Series, IC205 Series, and UF280 Series are versatile upright and canister vacuum cleaners designed for powerful deep cleaning on carpets and hard floors. They feature advanced suction technology, multiple attachments for various surfaces, HEPA filtration, easy-empty dust cups, and adjustable settings for different floor types. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brush roll, HEPA filter, Dust cup with one-touch release, Hose and wand assembly, On-board tool storage, Power cord with wrap.

Assembly & Installation

Unpack all parts and inspect for damage. Assemble on a clean, flat surface.

1. Attach the handle: Insert the handle into the main body until it clicks securely.
2. Connect the hose: Push the hose connector into the port on the vacuum body.
3. Attach the wand: Insert the wand into the hose grip and twist to lock.
4. Install the floor nozzle: Align the nozzle with the wand and push until it clicks.
5. Mount accessories: Place the crevice tool, dusting brush, and upholstery tool in the onboard storage clips.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Setup

Before first use, prepare the vacuum for operation.

1. Check filters: Ensure both pre-motor and HEPA filters are properly seated.
2. Adjust height setting: Set the floor selector to match your flooring (carpet or hard floor).
3. Unwind power cord: Fully extend the cord from the cord wrap.
4. Plug into a standard 120V AC outlet.
5. Turn on the vacuum using the power switch on the handle.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

• Model Series: Shark 250, IC205, UF280.
• Type: Upright/Canister vacuum cleaner.
• Suction Power: Adjustable, with strong suction for deep cleaning.
• Filtration: HEPA filter captures 99.9% of particles down to 0.3 microns.
• Dust Cup Capacity: 1.2 liters (varies by model).
• Cord Length: 25 feet.
• Attachments Included: Crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 15 lbs.

Controls and Settings

Main controls located on the handle and body. Handle: Power switch, Suction control slider. Body: Floor selector switch, Dust cup release button, Hose release lever.

Settings: Power On/Off, Suction Control (High/Low/Eco), Floor Type (Carpet/Hard Floor), Brush Roll On/Off (for delicate rugs).

Indicator Lights: Filter check light (flashes when filter needs cleaning), Brush roll jam indicator. Accessory Use: Detach wand and attach tools for above-floor cleaning.

Using Attachments

For cleaning above floors, furniture, and tight spaces.

1. Turn off the vacuum and detach the wand from the floor nozzle.
2. Select the desired tool from onboard storage.
3. Insert the tool into the end of the wand or hose until it clicks.
4. Turn on the vacuum and begin cleaning.
5. Common uses: Crevice tool for corners and edges; Dusting brush for shelves and blinds; Upholstery tool for sofas and curtains.

Tip: For best suction, ensure attachments are fully clicked into place.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet Mode: Set floor selector to "Carpet"; brush roll spins for deep cleaning.
2. Hard Floor Mode: Set to "Hard Floor"; brush roll may slow or stop to prevent scattering debris.
3. Area Rug Mode: Turn off brush roll (if available) to prevent fringe damage.
4. Above-Floor Mode: Use attachments with suction control set to appropriate level.
5. Eco Mode: Reduces suction power for extended battery life (on cordless models) or noise reduction.

WARNING! Do not vacuum large, hard objects (coins, paperclips) as they may damage the brush roll or motor.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup after each use: Press release button, remove cup, and empty into trash.
2. Clean filters monthly: Remove pre-motor and HEPA filters, tap gently, rinse if washable (allow to dry completely).
3. Check brush roll regularly: Remove hair and debris wrapped around the brush roll.
4. Inspect hose and attachments for clogs: Use a long object to clear any blockages.
5. Store properly: Wrap cord, store in a dry place away from heat sources.

CAUTION! Unplug before performing any maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com