Shark 2400WD Series Vacuum Cleaner Manual

The Shark 2400WD Series is a powerful upright vacuum cleaner designed for deep carpet cleaning and versatile floor care. It features a WindTunnel® technology that lifts and removes dirt, a motorized brushroll for carpets, a lift-away canister for portable cleaning above floors, an anti-allergen complete seal with HEPA filter, LED headlights, and a swivel steering for easy maneuverability. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with WindTunnel® technology, Lift-Away pod, Motorized brushroll, HEPA filtration system, LED headlights, Swivel steering, Hose and wand with accessory storage.

Feature	Description
WindTunnel® Technology	Creates multiple suction paths to lift and remove dirt
Lift-Away Canister	Detachable pod for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures microscopic particles for improved air quality
LED Headlights	Illuminates dark areas under furniture
Swivel Steering	Provides easy maneuverability around obstacles
Accessory Storage	Built-in caddy for hose, wand, and cleaning tools
Power Switch	Turns vacuum cleaner on/off
Brushroll On/Off	Disengages brushroll for hard floor cleaning

Assembly & Setup

Unpack and inspect all components. Assemble on a flat, stable surface.

Attach the handle: Align handle with upright body and secure with provided screws.
Install the hose and wand: Connect hose to pod and wand to hose until clicks are heard.
Attach cleaning tools: Store crevice tool, dusting brush, and upholstery tool in caddy.
Install filters: Place pre-motor and post-motor HEPA filters into their compartments.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before first use, ensure all filters are installed and canister is empty.

Select cleaning mode: Choose upright for carpets or Lift-Away for above-floor cleaning.
Adjust height setting: Use dial on vacuum head for carpet pile (low/medium/high).
Turn on power: Press power switch; LED lights will illuminate.
Engage brushroll: For carpets, ensure brushroll is ON; for hard floors, turn OFF.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.

CAUTION! Keep vacuum away from water and wet surfaces. Do not vacuum large objects.

Specifications

Model Series: Shark 2400WD.
Technology: WindTunnel® with multi-surface cleaning.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Brushroll: Motorized with on/off control.
Attachments: Crevice tool, dusting brush, upholstery tool, pet hair tool.
Capacity: 1.5-quart dust cup.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Weight: 15 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Brushroll on/off button. Body: Height adjustment dial, Lift-Away release button, Dust cup release latch.

Settings: Height adjustment (Low/Medium/High for carpet), Brushroll on/off (for carpets vs. hard floors), Suction control (via accessory selection).

LED indicators: Power ON (blue light), Brushroll status (green light when engaged).

Using Attachments

For above-floor cleaning, detach Lift-Away pod and connect desired tool.

Detach pod: Press release button on back of vacuum.
Connect hose: Extend hose from pod; attach wand if needed.
Select tool: Attach crevice tool, dusting brush, or upholstery tool to wand end.
Clean: Use tool on stairs, furniture, curtains, or tight spaces.
Return to upright: Reattach pod by aligning and pressing until it clicks.

Tip: Store attachments in built-in caddy when not in use.

Cleaning Modes

Two primary modes: Upright and Lift-Away.

Upright Mode: For carpets and large floor areas. Engage brushroll for deep cleaning.
Lift-Away Mode: Detach pod for portable cleaning. Ideal for stairs, furniture, and ceilings.
Hard Floor Setting: Turn brushroll OFF to prevent scattering debris.
Above-Floor Cleaning: Use hose and attachments for dusting and crevices.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release latch; empty when full or after each use.
Clean filters: Remove and tap HEPA filter monthly; wash pre-motor filter every 3 months (air dry completely).
Check brushroll: Remove hair and debris wrapped around brushroll monthly.
Inspect hose and wand: Clear any clogs using long object.
Store properly: Wrap cord around hooks; store in dry location.

CAUTION! Unplug vacuum before maintenance. Do not operate without filters installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 SharkNinja Operating LLC; trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean or replace filters; check for hose clogs.
Brushroll not spinning	Obstruction/overheat protection	Remove debris from brushroll; let vacuum cool for 45 minutes.
Vacuum won't turn on	Power cord/outlet issue	Check power outlet; ensure cord is fully plugged in; inspect for damage.
Unusual noise	Foreign object in brushroll/hose	Turn off and unplug; remove object from brushroll or hose.
HEPA filter light on	Filter needs cleaning/replacement	Clean HEPA filter or replace if worn (every 12 months).

Reset: Unplug for 1 hour to reset thermal protection.

Service: 1-800-798-7398; www.sharkclean.com